Bartlett, F. W. and T. W. Johnson (1932). Engineering descriptive geometry and drawing: a treatise on line drawing, descriptive geometry, and engineering or mechanical drawing, for the use of midshipmen at the United States Naval Academy. New York; London, J. Wiley & Sons, Inc: Chapman & Hall, Limited.
|
Barton, D. B. (1966). The Cornish beam engine: a survey of its history and development in the mines of Cornwall and Devon from before 1800 to the present day, with something of its use elsewhere in Britain and abroad. Truro, Barton.
|
Barton, L. O. (1993). Mechanism analysis: simplified graphical and analytical techniques. New York, M. Dekker.
|
Barton, P. K., T. J. Monaghan, et al. (1978). Co-ordination of mechanical and engineering services. Ascot, Institute of Building.
|
Bartz, W. J. (1993). Engine oils and automotive lubrication. New York; Ehningen, Germany, Marcel Dekker: Expert Verlag GmbH.
|
Bartz, W. J. and A. J. Moore (1993). Lubrication of gearing: lubricants and their properties, design of gears, practical gear lubrication, failure analysis. London, Mechanical Engineering Publications.
|
Barwell, F. T. and S. University College of (1965). The unity of engineering as illustrated by transport technology: inaugural lecture of the Professor of Mechanical Engineering delivered at the College on 23 November 1965. [Swansea], University College of Swansea.
|
Barwell, F. T. and University College of Swansea. (1966). The unity of engineering as illustrated by transport technology: inaugural lecture of the Professor of Mechanical Engineering delivered at the College on 23rd November 1865. Swansea, University College.
|
Basheev, S. i. M. i. (1970). Detali mashia v primerakh i zadachakh.
|
Basset (1857). Tableau elementaire de mecanique industrielle [educational sheet].
|
Bassett, R. W. (1971). Improvements to a smoke generator for use in wind tunnels, National Research Council of Canada.
|
Basu, N. (1979). Diesel engine mounting forces and their correlation with sub-structure-noise, Original typescript.
|
Basu, P., Canadian Society for Chemical Engineering., et al. (1986). Circulating fluidized bed technology: proceedings of the First International Conference on Circulating Fluidized Beds, Halifax, Nova Scotia, Canada, November 18-20, 1985. Toronto; New York, Pergamon Press.
|
Basu, P., E. Canadian Society for Chemical, et al. (1986). Circulating fluidized bed technology: 1st International conference on circulating fluidized beds: Papers. Toronto; New York, Pergamon Press.
|
Basu, P., K. Cen, et al. (1999). Boilers and burners: design and theory. New York, Springer.
|
Batchelor, A. W. (1983). Iron sulphide films on steel surfaces: 312 leaves, 7 leaves of plates.
|
Bates, D. N. J. (1987). The mechanics of thin walled sructures: with special reference to finite rotations: 241 leaves.
|
Bathe Klaus, J. (1975). Adina: a finite element program for automatic dynamic incremental nonlinear analysis, MIT.
|
Bathie, W. W. (1984). Fundamentals of gas turbines. New York; Chichester, Wiley.
|
Batista, R. C. (1979). Lower bound estimates for cylindrical shell buckling.
|
Batoz, J.-L. and e. Integrated design and manufacturing in mechanical (1999). Integrated design and manufacturing in mechanical engineering '98: proceedings of the 2nd IDMME Conference held in Compiègne, France, 27-29 May 1998. Dordrecht; London, Kluwer Academic.
|
Batra, R. C., H. M. Zbib, et al. (1994). Material instabilities: theory and application: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Batra, R. C., H. M. Zbib, et al., Eds. (1994). Material instabilities: theory and application: International mechanical engineering congress: Papers. ASME -publications- MD; vol 50, ASME.
|
Batra, R. C., J. Coulter, et al., Eds. (1995). Proceedings of the ASME Materials Division, ASME.
|
Batson Reginald George, C. and J. Bradley (1928). The Effect of "Nip" on the Mechanical Properties of Laminated Springs. (Researches on Springs. 5.) [With plates.], London.
|
Batson, R. G. (1922). Mechanical testing: a treatise. [S.l.], Chapman & Hall.
|
Batson, R. G. and J. H. Hyde (1922). Mechanical Testing: A treatise in two volumes. London, Chapman and Hall.
|
Battisti, E., G. Saccaro Battisti, et al. (1984). Le macchine cifrate di Giovanni Fontana: con la riproduzione del Cod. icon. 242 della Bayerische Staatsbibliothek di Monaco di Baviera e la decrittazione di esso e del Cod. lat. nouv. acq. 635 della Bibliothèque nationale di Parigi. Milano, Arcadia Edizioni.
|
Battle, J. R. (1920). The handbook of industrial oil engineering: a reference book of data, relating to lubrication and industrial oils, including tables, general oil information, engineering and industrial requirements, for the use of oil engineers, lubricating engineers, oil salesmen, oil equipment manufacturers, mechanical engineers, machinery designers, mill and power plant superintendents, and others interested in the efficient utilization of oil products and equipment, and the conservation of power. Includes the Lubricating engineer's handbook revised. Philadelphia; and London, J.B. Lippincott company.
|
Baumeister, T. and L. S. Marks (1967). Standard handbook for mechanical engineers. New York; London, McGraw-Hill.
|
Bautista, E., J. Garcia-Lomas, et al. (1987). The theory of machines and mechanisms: proceedings of the 7th World Congress, 17-22 September 1987, Sevilla, Spain. Oxford, Pergamon Press.
|
Baxter, D. C. (1964). The digital simulation of transfer functions. Ottawa, National Research Council of Canada.
|
Bayazitoglu, Y., A. H. T. Division, et al., Eds. (2002). Advances in heat and mass transfer in biotechnology -2002.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Computational heat transfer: vol 6.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Heat transfer equipment: vol 4.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Heat transfer in electronic equipment: vol 7.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Heat transfer in energy systems: vol 3.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Theory and fundamentals of heat transfer: vol 1.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Theory and fundamentals of heat transfer: vol 2.
|
Bayazitoglu, Y., H. S. Cameron, et al., Eds. (2002). Transport phenomena in maufacturing and materials processing: vol 5.
|
