Blake, A. (1982). Practical stress analysis in engineering design. New York, Dekker.
|
Blake, A. (1985). Design of mechanical joints. New York, M. Dekker.
|
Blake, A. (1985). Handbook of mechanics, materials and structures. New York; Chichester, Wiley.
|
Blake, A. (1996). Practical fracture mechanics in design. New York, M. Dekker.
|
Blake, W. K. (1986). Mechanics of flow-induced sound and vibration. New York; London, Academic Press.
|
Blaschke, P. G. (1996). Vibro-acoustic design tool for noise optimization of rotating machines.
|
Blasynski, T. Z., Leeds Eng. University. Dept. of Mechanical Engineering., et al. (1973). The use of high-energy rate methods for forming, welding and compaction. Leeds, University of Leeds.
|
Blau, P. J. (1995). Friction science and technology. New York, Marcel Dekker.
|
Blazynski, T. Z. and B. University of Leeds. Department of (1973). The use of high-energy rate methods for forming, welding and compaction: papers presented at a conference sponsored by the Department of Mechanical Engineering, the University of Leeds and the High Pressure Technology Association, 27-29 March, 1973. Leeds (Leeds LS2 9JT), University of Leeds.
|
Blenkarn, J. (1865). Practical Specifications of Works executed in architecture, civil and mechanical engineering, and in road-making and sewering, etc. London, E. & F. N. Spon.
|
Blenkarn, J. (1868). Practical specifications of works executed in architecture, civil and mechanical engineering and in road making and sewering. Philadelphia, H. C. Baird.
|
Blenkarn, J. (1868). Practical specifications of works executed in architecture, civil and mechanical engineering: and in roadmaking and sewering: to which are added a series of practically useful agreements and reports. American culture series II, reel 35; 035.006. Philadelphia, H.C. Baird.
|
Blenkarn, J. (1868). Practical specifications of works executed in architecture, civil and mechanical engineering. Philadelphia, Henry Carey Baird.
|
Blight, G. E. (1961). Strength and consolidation characteristics of compacted soils.
|
Bloch, H. P. and F. K. Geitner (1983). Machinery failure analysis and troubleshooting. Houston, Gulf Pub. Co.
|
Blok, H., G. Round-Table Discussion on Marine Reduction, et al. (1958). Round-Table Discussion on Marine Reduction Gears 1957: proceedings of a symposium held at the University of Technology, Department of Mechanical Engineering, 25th and 26th April, 1957. Delft, University of Technology.
|
Blokhuizen, C. and F. v. Montfort (1998). Ingenieurs, scholing en onderwijscultuur: een studie naar de betekenis van cultuur en kwaliteit voor de opleiding en vorming van werktuigkundige ingenieurs binnen hogescholen. Tilburg, Tilburg University Press.
|
Bloomer, J. J. (2000). Practical fluid mechanics for engineering applications. New York, Marcel Dekker.
|
Bloss, W. H., G. Grassi, et al. (1982). Fourth E.C. Photovoltaic Solar Energy Conference: proceedings of the international conference held at Stresa, Italy, 10-14 May, 1982. Dordrecht, Reidel.
|
Bloy, N. (1620). The seuerall engines that Nicholas Bloy, enginer, professeth, be nyne in number, these as followeth. [London, T. Purfoot.
|
Bluck, M. J. (1994). Integral equation methods for transient wave propagation.
|
Blythman, G. (1996). Watermills & windmills of Middlesex. Buckingham, Baron Birch, for Quotes.
|
Bob-Manuel, K. D. H. (1983). Turbocharged spark ignition engine performance and emissions with alternative fuels: 445 leaves, 4 leaves of plates.
|
Boccio John, L. and Asme, Eds. (1999). Safety engineering and risk analysis 1999, ASME.
|
Boccio, J. L. and American Society of Mechanical Engineers. Safety Engineering and Risk Analysis Division. (1999). Safety engineering and risk analysis, 1999: presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee. New York, American Society of Mechanical Engineers.
|
Bock, G. E. (1931). What makes the wheels go 'round. New York, The Macmillan company.
|
Böckler, G. A. and H. Schmitz (1662). Theatrum machinarvm novvm, exhibens aqvarias, alatas, ivmentarias, manuarias. Variis frumentis commolendis, chartæ, & nitrato pulveri apparando, diversis tundendis, serrandis, terebrandis, panno constipando, decorando. aliisque hydrergis variis, per quæ in sublime aqua attolli, derivari, & traduci aliò potest. Coloniae Agrippinae, sumptibus P. Principis, P. Furst.
|
Böckler, G. A. and H. Schmitz (1662). Theatrum machinarvm novvm, exhibeus aqvarias, alatas, ivmentarias, manuarias. Coloniæ Agrippinæ, sumptibus P. Principis.
|
Böckler, G. A., P. Fürst, et al. (1662). Theatrum machinarum novum: exhibens aquarias, alatas, iumentarias, manuarias; pedibus, ac ponderibus versatiles, plures, et diversas molas. Variis frumentis commolendis, chartæ, & nitrato pulveri apparando, diversis tundendis, serrandis, terebrandis, panno constipando, decorando, aliisquè usibus destinatas, adaptatas. annexis prætereà organorum, utensilium necessariorum, & utilium, ad hæc apparanda, figuris & explicationibus. Coloniae Agrippinae, Sumptibus Pauli Principis, Technempolaei Noribergici.
|
Bodleian, L. and L. British Library. Newspaper (1991). Business and financial papers, 1780-1939. Marlborough, Adam Matthew.
|
Boehm, R. F., A. Zaltash, et al. (2003). Proceedings of the ASME Advanced Energy Systems Division--2003: presented at the 2003 ASME International Mechanical Engineering Congress: November 15-21, 2003, Washington, D.C. New York, N.Y., American Society of Mechanical Engineers.
|
Bögelsack, G. and International Federation for the Theory of Machines and Mechanisms. Commission A "Standards for Terminology." (1983). Terminology for the theory of machines and mechanisms. Oxford; New York, Pergamon Press.
|
Bogoliubov Aleksei, N. (1982). Ivan Ivanovich Artobolevskii, 1905-1977. Moskva, Nauka.
|
Bogoliubov Aleksei, N. and I. I. Artobolevskii (1975). Sovetskaia shkola mekhaniki mashin. Moskva, Nauka.
|
Bogoliubov, A. N. and æ. Z. Shtokalo (1987). Istoriia mekhaniki v Rossii. Kiev, Nauk. dumka.
|
Bogolyubov, S. and A. Voinov (1968). Engineering Drawing: A Course for Technical Schools of Mechanical Engineering. Moscow, MIR Publishers.
|
Boldy, A. P., C. International Conference on Pressure Surges and Fluid Transients in Pipelines and Open, et al. (1996). 7th international conference on pressure surges and fluid transients in pipelines and open channels: papers presented at the 7th international conference on pressure surges and fluid transients in pipelines and open channels, organized and sponsored by the BHR Group Limited, and held in Harrogate, UK on 16-18 April 1996. London, Mechanical Engineering Publications.
|
Bollinger, J. G. and N. A. Duffie (1988). Computer control of machines and processes. Reading, Mass; Wokingham, Addison-Wesley Publishing Company.
|
Boloorsaz-Mashadi, Z. (1990). Mechanical and biological study of repair of flexor tendon.
|
Bolotin, V. V. (1989). Prediction of service life for machines and structures. New York, ASME Press.
|
