Campin, F. (1863). A Practical Treatise on Mechanical Engineering. With an appendix on the analysis of iron and iron ores. London, Atchley & Co.
|
Campin, F. (1881). A Practical Treatise on Mechanical Engineering, etc. London, C. Lockwood & Co.
|
Campioni, R., Leonardo, et al. (1994). Leonardo artista delle macchine e cartografo. Firenze, Giunti.
|
Campos, E. S. (1994). Theory of plasticity applied to the slant shear test.
|
Campos, T. M. P. d. (1984). Two low plasticity clays under cyclic and transient loading.
|
Camus, C.-É.-L. (1732). Traité des forces mouvantes pour la pratique des arts et métiers: avec une explication de vingt machines nouvelles & utiles. Paris, Chez C. Jombert.
|
Canada (1959). Mechanical Engineering Report MS-100 [etc.], Ottawa.
|
Canada (1960). Mechanical Engineering Report MA-243 [etc.], Ottawa.
|
Canada and Canada (1961). Quarterly Bulletin of the Division of Mechanical Engineering and the National Aeronautical Establishment. 1 Oct./31 Dec. 1961, etc, Ottawa.
|
Canadian Natural Gas Processing, A., E. Canadian Society for Mechanical, et al. (1977). Design of processing plants, Canadian Society for Chemical Engineering.
|
Canadian Society for Mechanical Engineering. (1972). Transactions of the Canadian Society for Mechanical Engineering = Transactions de la Société canadienne de génie mécanique. Canada, The Society: v.
|
Canadian Society for Mechanical, E. (1994). Forum: Papers, CSME.
|
Canadian Society for Mechanical, E. (1996). CSME forum SCGM 1996: theory of machines and mechanisms and advances in transportation systems, [np].
|
Canadian Society for Mechanical, E., A. Canadian Natural Gas Processing, et al. (1977). 27th Canadian chemical engineering conference, Canadian Society for Chemical Engineering.
|
Canadian Society of Mechanical, E. (1990). Mechanical engineering forum: Papers, Canadian Society of Mechanical Engineers.
|
Canfield, E. B. (1977). Electromechanical control systems and devices. Huntington, N.Y, R. E. Krieger Pub. Co.
|
Canfori, A., E. Huici, et al. (1926). El mecánico práctico. Barcelona, B. Bauza.
|
Cann, P. M. E. (1982). Antiwear lubricant additives containing phosphorous: 264 leaves, 3 leaves of plates.
|
Cannell, R. J. (1988). Radiation exposure in an urban dwelling following an accidental release of radioactivity.
|
Cao, J., J. Endres William, et al., Eds. (2002). Proceedings of the ASME Manufacturing Engineering Division 2002.
|
Cao, J., W. J. Endres, et al. (2002). Proceedings of the ASME Manufacturing Engineering Division--2002: presented at the 2002 ASME International Mechanical Engineering Congress and Exposition: November 17-22, 2002, New Orleans, Louisiana. New York, New York, American Society of Mechanical Engineers.
|
Card, G. B. (1981). The properties and performance of bentonite-cement slurries for use as hydraulic cut-offs: 334 leaves, 13 leaves of plates.
|
Cardellino, G., F. Conese, et al. (1940). Esercitazioni grafiche di meccanica applicata alle macchine. Torino, V. Giorgio.
|
Carden, C. M. (1989). Gas dynamics in exhaust systems of turbocharged medium-speed engines.
|
Cardew-Hall, M. J. (1988). Modelling and integrated inspection of cast turbine blades.
|
Careers Research and Advisory Centre. (1968). Mechanical engineering; a guide to first degree courses in UK universities & colleges. [Cambridge.
|
Careers Research and Advisory, C. (1986). Technology. Cambridge, Hobsons Press (Cambridge) Ltd.
|
Carey Van, P. (1992). Liquid-vapor phase-change phenomena, Hemisphere.
|
Carey, V. P. (1992). Liquid-vapor phase-change phenomena: an introduction to the thermophysics of vaporization and condensation processes in heat transfer equipment. Washington, D.C; London, Hemisphere Pub. Corp.
|
Carling, M. J. (1988). Fracture mechanics of short fibre composites.
|
Carlson, H. (1978). Spring designer's handbook. New York, M. Dekker.
|
Carlson, H. (1980). Springs: troubleshooting and failure analysis. New York, M. Dekker.
|
Carlson, H. (1982). Spring manufacturing handbook. New York, Dekker.
|
Carman, G. P. and American Society of Mechanical Engineers. Aerospace Division. (2003). Proceedings of the ASME Aerospace Division--2003: presented at the 2003 ASME International Mechanical Engineering Congress, November 15-21, 2003, Washington, D.C. New York, N.Y., American Society of Mechanical Engineers.
|
Carman, G. P. and American Society of Mechanical Engineers. Aerospace Division. (2004). Proceedings of the ASME Aerospace Division--2004: Adaptive materials and systems: aerospace materials and structures; presented at the 2004 ASME International Mechanical Engineering Congress and Exposition: November 13-19, 2004, Anaheim, California USA. New York, N.Y., American Society of Mechanical Engineers.
|
Carman, G. P., D. American Society of Mechanical Engineers. Aerospace, et al. (2004). Proceedings of the ASME Aerospace Division--2004: Adaptive materials and systems: aerospace materials and structures: November 13-19, 2004, Anaheim, California USA. New York, N.Y., American Society of Mechanical Engineers.
|
Carne, M. M. P., G. Slater, et al. (1988). The integrity of offshore pipeline girth welds: the influence of hydrogen on the fracture toughness of cellulosic coated electrode weld deposits. London, H.M.S.O.
|
Carnegie Institute of Technology Pittsburgh. Dept. of Mechanical Engineering. [from old catalog] (1954). Technical note. Pittsburgh: no.
|
Carnegie-Mellon University Department of Chemical, E., I. Carnegie-Mellon University Processing Research, et al. (1973). An integrated utility system: projects in the Departments of Chemical and Mechanical Engineering, Carnegie-Mellon University. Pittsburgh, [Processing Research Institute, Carnegie-Mellon University.
|
Carnegie-Mellon University Department of Mechanical, E. (1973). New manufacturing techniques: projects in the Department of Mechanical Engineering, Carnegie-Mellon University. Ann Arbor, Mich., Xerox University Microfilms.
|
