Congress, S. A. E. I., Exposition, et al. (1983). The adiabatic diesel engine. Warrendale, PA, Society of Automotive Engineers.
|
Conley, P. (1998). Space vehicle mechanisms: elements of successful design. New York; Chichester, John Wiley & Sons.
|
Connolly, M. P. (1987). A fracture mechanics approach to the fatigue assessment of tubular welded Y and K joints: 263 leaves.
|
Considine, D. M. (1993). Process/industrial instruments and controls handbook. New York; London, McGraw-Hill, Inc.
|
Constance John, D. (1978). Mechanical engineering for professional engineers' examinations. New York; London, McGraw-Hill.
|
Constance, J. D. (1962). Mechanical engineering for professional engineers' examinations: including questions and answers for engineer-in-training review. New York, McGraw-Hill.
|
Constance, J. D. (1983). Controlling in-plant airborne contaminants: systems design and calculations. New York, M. Dekker.
|
Constans, J. and T. United Nations. Office for Science and (1979). Marine sources of energy. New York; Oxford, Pergamon for the United Nations Department of International Economic and Social Affairs Office for Science and Technology.
|
Constantine, C. J., J. E. Bowman, et al. (1991). Development of models and computer programs for leteral dynamics of automobiles during combined braking and steering maneuvers. Clemson, S.C., Mechanical Engineering Department, College of Engineering & Science, Clemson University.
|
Constantinescu Virgiliu, N. (1995). Laminar viscous flow. New York; London, Springer.
|
Construction Industry Training Board Training Analysis and Systems, S. and S. Construction Industry Training Board Mechanical Engineering Services (1974). Sizing a hot water services system. [London], The Board.
|
Construction Industry Training Board. Training Analysis and Systems, S. (1974). Sizing a heating system. [London], Construction Industry and Training Board.
|
Construction Industry Training, B. (1972). Heat loss calculation, London.
|
Construction Industry Training, B. (1976). An introduction to basic sub-contract conditions for mechanical engineering services. London (Radnos House, London Rd, SW16 4EL), CITB.
|
Construction Industry Training, B. (1979). Mechanical engineering services: Apprentice achievement record. King's Lynn, C.I.T.B. (Building Services Department).
|
Construction Industry Training, B. (1979). Mechanical engineering services: New entrant training scheme. King's Lynn, C.I.T.B. (Building Services Department).
|
Construction Industry Training, B. (1979). Mechanical engineering services: Updating training for certified fitter/welders and plumbers. King's Lynn, C.I.T.B., (Building Services Department).
|
Construction Industry Training, B. (1983). Basic training for mechanical engineering services. London, Construction Industry Training Board.
|
Construction Industry Training, B. (1983). Mechanical engineering services: Four week added training. [S.l.], C.I.T.B.
|
Conte, R. V., J. Pieper, et al. (1999). FE/EIT: the best test preparation & review course: fundamentals of engineering/engineer-in-training: PM exam in mechanical engineering. Piscataway, NJ, Research and Education Association.
|
Convention on Applied, M. and G. Institution of Mechanical Engineers. Applied Mechanics (1964). Applied mechanics convention 1964. London, Institution of Mechanical Engineers.
|
Convention on Techniques of Works, E. (1964). Techniques of works engineering: a conference arranged by the Process Engineering Group. London, [Institution of Mechanical Engineers].
|
Convention on, A. and G. Institution of Mechanical Engineers. Railway Engineering (1965). Adhesion: a convention arranged by the Railway Engineering Group, London, 27th and 28th November 1963. London, Institution of Mechanical Engineers.
|
Conway Ted, A. and A. B. Division, Eds. (2000). 2000 Advances in bioengineering, ASME.
|
Cook, H. D. (1921). Civil and Mechanical Engineering Works.-General Arrangement of Stations.
|
Cook, S. C. (1983). Systems identification and control of wastewater treatment processes in river management: 428 leaves.
|
Cooke, D. A. D. and C. Careers Research and Advisory (1966). Mechanical engineering: a guide to first degree courses in U.K. universities and colleges. Cambridge, s.n.
|
Cooper, A. B. (1952). Mechanical engineering around Bristol. London, The Institution.
|
Cooper, K. G. (2001). Rapid prototyping technology: selection and application. New York, Marcel Dekker.
|
Cooper, S. A. (1949). Concise international dictionary of mechanics & geology: English, French, German, and Spanish. London; Toronto, Cassell.
|
Cooper, S. A. (1958). Concise international dictionary of mechanics & geology. New York, Philosophical Library.
|
Coopers, Lybrand, et al. (1978). Computer aided design and Manufacture: survey of available systems and scope for their application in mechanical engineering. [London], [D. of I.].
|
Corbin Thomas, W. (1924). Mechanical Engineering. Illustrated, etc. London, C. Arthur Pearson.
|
Corbin, W. H. (1943). Edward Clinton Terry, PH. B: member of American society of civil engineers, pioneer in hydraulic and mechanical engineering. [Hartford, Conn.], Privately published, L. E. Terry.
|
Corboy, W. G. and Technical Association of the Pulp and Paper Industry. Maintenance and Mechanical Engineering Committee. Yankee Dryer Safety Subcommittee. (1992). Yankee dryers: guidelines for safety and condition assessment: a project of the Yankee Dryer Safety Subcommittee of the Maintenance and Mechanical Engineering Committee of the Engineering Division. Atlanta, GA, U.S.A., TAPPI Press.
|
Coren, G. (1964). Professional engineer's examination; mechanical engineering, part 3. [New York], Arco Pub. Co.
|
Coren, G. (1978). Professional engineer's examination: mechanical engineering, part B. New York, Arco Pub. Co.
|
Cornell university. Electrical society. and Cornell university. Society of mechanical engineers. (1902). Proceedings of the Electrical society and of the Society of mechanical engineers of Cornell university, 1901-02. Ithaca, N.Y., The Societies.
|
Cornell university. Sibley college of mechanical engineering and the mechanic arts. [from old catalog] (1913). Announcement. Ithaca, N.Y.
|
Corner James, T. (1945). Mechanical Engineering and Workshop Practice. London, Vawser & Wiles.
|
