Donaldson, J., Norie, et al. (1895). Drawing and rough sketching for marine engineers: with proportions, instructions, explanations, and examples: intended for the use of sea-going engineers and others in preparing working sketches and rough drawings.: also how to design engines, boilers, propellers, paddle-wheels shafts, rods, valves, etc.: and information useful as a reference to those concerned in the construction of marine machinery. London, Norie & Wilson.:J.D. Potter; Liverpool:Philip, Son & Nephew.; Glasgow: W. & R. Holmes.;New York: Spon & Chamberlain.
|
Dong, P. (1988). The computation of wave-induced circulations with wave-current interaction and refined turbulence modelling.
|
Donkoh, D. K. N. (1984). Use of continuous loading functions for plasticity-based models of materials exhibiting workhardening, degradation and softening.
|
Donovan, R. P. (1985). Fabric filtration for combustion sources: fundamentals and basic technology. New York, M. Dekker.
|
Doolittle, J. S. (1957). Mechanical engineering laboratory instrumentation and its application. New York, McGraw-Hill.
|
Doolittle, J. S. (1959). Thermodynamics for engineers. Scranton, Pa., International Textbook Co.
|
Doolittle, J. S. and A. H. Zerban (1948). Engineering thermodynamics: theory and applications. Scranton, Pa, International Textbook Co.
|
Doran, S. M. (1985). Surface settlement and bleeding in fresh cement grouts: 231 leaves, 6 leaves of plates.
|
Dorf, R. C. (1983). Robotics and automated manufacturing. Reston, Va., Reston Pub. Co.
|
Dorn John, E. (1961). Mechanical Behavior of Materials at Elevated Temperatures. Edited by John E. Dorn. [By various authors.]. New York, McGraw-Hill Book Co.
|
Dorn, J. E. and F. R. Shanley (1961). Mechanical behavior of materials at elevated temperatures. New York; London, McGraw-Hill Book Co.
|
Dornfeld, D. A. and National Science Foundation (U.S.). Design Manufacturing and Computer-Integrated Engineering Division. (1989). Advances in manufacturing systems integration and processes: conference proceedings. Dearborn, Mich., Society of Manufacturing Engineers.
|
Dornig, A. (1971). Costruzione di macchine II. Milano, Clup.
|
Dörr, H. (1986). The hydraulic trainer. Lohr am Main, Mannesmann Rexroth.
|
Dote, Y. and S. Kinoshita (1990). Brushless servomotors: fundamentals and applications. Oxford, Clarendon Press.
|
Douglas, A. and E. Travelling Workshops (1978). Mechanical engineering information: a guide to sources. Newcastle upon Tyne, T.W.E., Newcastle upon Tyne Polytechnic Library.
|
Douglas, I. J. and J. D. G. Crichton (1972). S.I. engineering mechanics. Edinburgh, Oliver and Boyd.
|
Douglas, J. C. (1875). A manual of telegraph construction: the mechanical elements of electric telegraph engineering. London, C. Griffin and company.
|
Douglas, J. L., G. T. Armstrong, et al. (1981). Geometric modelling project: parts surveys report. Leeds, Geometric Modelling Project, Department of Mechanical Engineering and Industrial Unit, University of Leeds.
|
Doulgeri, Z. (1987). Production scheduling policy for flexible manufacturing systems: 205 leaves.
|
Doumerg, R. (1965). Cours de mécanique pour l'enseignement technique. Catus, Lot, l'auteur.
|
Dounias, G. T. (1987). Progressive failure in embankment dams: 380 leaves.
|
Dow, C. S. (1907). Practical mechanical engineering; a comprehensive treatise on steam machinery and apparatus, compressed air, refrigerating machinery, hydraulic elevators, gas and oil engines, turbines, etc. Philadelphia, The American text-book co.
|
Dowling, N. E. (1993). Mechanical behavior of materials: engineering methods for deformation, fracture, and fatigue. Englewood Cliffs, N.J.; London, Prentice Hall.
|
Dowman, I. J. (1981). A photogrammetric plotting instrument for automatic image correlation and height determination: 313 leaves, 6 leaves of plates.
|
Dowson, D. (1979). Elastohydrodynamics and related topics: proceedings of the 5th Leeds-Lyon Symposium on Tribology held in the Institute of Tribology, Department of Mechanical Engineering, the University of Leeds, England, Sept. 1978. London, Mechanical Engineering Publications for the Institute of Tribology, Leeds University and the Institut national des sciences appliquées de Lyon.
|
Dowson, D. and E. Institution of Mechanical (1998). Orthopaedic implants and implant materials: a collection of significant papers originally published in the Journal of engineering in medicine, part H of the Proceedings of the Institution of Mechanical Engineers. Bury St Edmunds, Mechanical Engineering Publications.
|
Dowson, D., M. Godet, et al. (1975). Cavitation and related phenomena in lubrication: proceedings of the 1st Leeds-Lyon Symposium on Tribology held in the Institute of Tribology, Department of Mechanical Engineering, the University of Leeds, England, September 1974. London (etc.), Published by Mechanical Engineering Publications for the Institute of Tribology, Leeds University and the Institut National des Sciences Appliquees de Lyon.
|
Dowson, D., M. Godet, et al. (1978). The wear of non-metallic materials: proceedings of the 3rd Leeds-Lyon Symposium on Tribology held in The Institute of Tribology Department of Mechanical Engineering The University of Leeds September 1976. London, Mechanical Engineering Publications Limited for the Institute of Tribology Leeds University and The Institut National Des Sciences Appliquees De Lyon.
|
Dowson, D., M. Godet, et al. (1978). The wear of non-metallic materials: proceedings of the 3rd Leeds-Lyon Symposium on Tribology held in the Institute of Tribology, Department of Mechanical Engineering, The University of Leeds, England, September 1976. London, Mechanical Engineering Publications Limited for the Institute of Tribology, Leeds University and the Institut national des sciences appliquées de Lyon.
|
Dowson, D., T. Leeds-Lyon Symposium on, et al. (1979). Elastohydrodynamics and related topics: proceedings of the 5th Leeds-Lyon Symposium on Tribology held in the Institute of Tribology, Department of Mechanical Engineering, the University of Leeds, England, September 1978. London, Mechanical Engineering Publications for the Institute of Tribology, Leeds University and the Institut national des sciences appliquees de Lyon.
|
Dowson, D., T. Leeds-Lyon Symposium on, et al. (1997). Elastohydrodynamics '96: fundamentals and applications in lubrication and traction: proceedings of the 23rd Leeds-Lyon Symposium on Tribology, held in the Institute of Tribology, Department of Mechanical Engineering, University of Leeds, UK, 10th - 13th September, 1996. Amsterdam; Oxford, Elsevier for the Institute of Tribology, the University of Leeds and the Institut national des sciences appliquees de Lyon.
|
Dowson, D., T. Leeds-Lyon Symposium on, et al. (2000). Thinning films and tribological interfaces: proceedings of the 26th Leeds-Lyon Symposium on Tribology held in the Institute of Tribology, School of Mechanical Engineering, The University of Leeds, UK 14th-17th September, 1999. Amsterdam; New York, Elsevier Science.
|
Dowson, D., T. University of Leeds. Institute of, et al. (1981). Friction and traction: proceedings of the 7th Leeds-Lyon Symposium on Tribology held in the Institute of Tribology, Department of Mechanical Engineering, University of Leeds, England, 9-12 September 1980. Guildford, Westbury House for the Institute of Tribology, Leeds University and the Institut National des Sciences Appliquees, Lyon.
|
Dowson, P. H. (1994). The fate and behaviour of organotin compounds in the aquatic environment.
|
Doyle, J. F. (1997). Wave propagation in structures: spectral analysis using fast discrete Fourier transforms. New York; London, Springer.
|
Doyle, J. F. (2001). Nonlinear analysis of thin-walled structures: statics, dynamics, and stability. New York, Springer.
|
Doyon, A. and L. Liaigre (1966). Jacques Vaucanson: mécanicien de génie. Paris, Presses Universitaires de France.
|
Drabble, G. E. (1989). Elementary engineering mechanics. Basingstoke, English Language Book Society/Macmillan.
|
Drachmann, A. G. (1963). The mechanical technology of Greek and Roman antiquity: a study of the literary sources. [Copenhagen], Munksgaard.
|
