Drake, K. R. (1984). Dynamics of large diameter articulated columns in waves: 275 leaves.
|
Dransfield, P. (1981). Hydraulic control systems--design and analysis of their dynamics. Berlin; New York, Springer-Verlag.
|
Driels, M. R. (1996). Linear control systems engineering. New York; London, McGraw-Hill, Inc.
|
Drinkwater, B. W. (1995). The use of dry coupling in ultrasonic nondestructive testing.
|
Dris, A. (2003). Boundary layer transition on a flat plate and concave surfaces. Liverpool, Thesis Ph.D.
|
Driskell, L. and A. Instrument Society of (1983). Control-valve selection and sizing. Research Triangle Park, N.C., Instrument Society of America.
|
Druce, G. and Seed (1989). Sub-system specification: planar mechanisms. [Hatfield?], SEED in association with the Design Council.
|
Druce, G. and Seed (1989). Sub-system specification, SEED.
|
Druce, G. and Seed (1996). Cam mechanics. [S.l.], SEED in association with The Design Council.
|
Druce, G. and Seed (1998). Tutor's guide: cam mechanisms. [Hatfield?], SEED in association with the Design Council.
|
Drzymala, Z. (1993). Industrial briquetting: fundamentals and methods. Amsterdam, Elsevier.
|
D'Souza, A. F. (1988). Design of control systems. London, Prentice-Hall International.
|
Duan Xiao, N. (1992). Inelastic response and effective design of asymmetric buildings under strong earthquake loading.
|
Duan, D. (1996). Fracture toughness and long term fracture behaviour of polyethylenes.
|
Duarte, M. L. M. (1996). Experimentally-derived structural models for use in further dynamic analysis.
|
Dubbel, H. (1963). Taschenbuch für den Maschinenbau bearb. von Ch. Bouché. Berlin, Springer.
|
Dubbel, H. and F. Sass (1966). Taschenbuch fur den Maschinenbau. Berlin, Heidelberg, New York, Springer.
|
Dubbel, H., W. Beitz, et al. (1981). Taschenbuch für den Maschinenbau. Berlin, Springer.
|
Dubbel, H., W. Beitz, et al. (1994). Handbook of mechanical engineering. London; New York, Springer-Verlag.
|
Dubey, R. N., N. C. Lind, et al. (1977). Mechanics in engineering: proceedings of the First ASCE-EMD Speciality Conference on Mechanics in Engineering held at the University of Waterloo, May 26-28, 1976. Waterloo, Ont., Solid Mechanics Division, University of Waterloo.
|
Duffie, J. A. and W. A. Beckman (1974). Solar energy thermal processes. New York; London [etc.], Wiley-Interscience.
|
Duffie, J. A. and W. A. Beckman (1980). Solar engineering of thermal processes. New York; Chichester, Wiley-Interscience.
|
Duffy, J. (1980). Analysis of mechanisms and robot manipulators. London, Edward Arnold.
|
Duffy, J. W. (1972). Power; prime mover of technology. Bloomington, Ill., McKnight & McKnight.
|
Dugdale, R. H. and J. C. Morfett (1983). Mechanics of fluids. London, George Godwin.
|
Dukkipati, R. V. and R. Amyot Joseph (1988). Computer-aided simulation in railway dynamics. New York, Dekker.
|
Duncan, A. B. and A. A. E. S. Division, Eds. (1996). Proceedings of the ASME Advanced Energy Systems Division, ASME.
|
Dunn, P. F. (2005). Measurement and data analysis for engineering and science. Boston, London: McGraw-Hill Higher Education.
|
Dunne, P. M. (1967). Engineering drawing for advanced students. Oxford; New York, Pergamon Press.
|
Dunsby, J. A. and A. C. Walker (1969). The fatigue strength of butt-welded and plain specimens of 18(250) maraging steel plate. [Ottawa, National Research Council of Canada.
|
Dupuis Nathan, F. (1910). The Elements of Astronomy, principally on the mechanical side. Intended for engineering students. Kingston, Ont., R. Uglow & Co.
|
Durelli August, J., A. Phillips Earl, et al. (1958). Introduction to the Theoretical and Experimental Analysis of Stress and Strain. [By] A. J. Durelli. E. A. Phillips. C. H. Tsao. New York, McGraw-Hill Book Co.
|
Durelli, A. J., E. A. Phillips, et al. (1958). Introduction to the theoretical and experimental analysis of stress and strain. New York, McGraw-Hill.
|
Durelli, A. J., E. A. Phillips, et al. (1958). Introduction to theoretical and experimental analysis of stress and strain. New York; London, McGraw-Hill.
|
Durnev, V. D. and m. Institut problem (1992). Seminar "Aktual'nye problemy mekhaniki i mashinostroeniia" imeni V.V. Novozhilova, Sektsiia "Tekhnologiia mashinostroeniia": sbornik nauchnykh dokladov. Sankt-Peterburg, Rossiiiskaia Akademiia nauk, In-t problem mashinovedeniia.
|
Durodola, J. F. O. (1991). Continuous boundary elements for potential problems.
|
Durrant-Whyte, H. F. (1988). Integration, coordination and control of multi-sensor robot systems. Bostan, Mass.; Lancaster, Kluwer Academic Publishers.
|
Durst, F. (1972). Development and application of optical anemometers.
|
Durst, F. J., A. J. Yule, et al. (1986). Advanced laser-doppler anemometry course: Lectures, UMIST.
|
Dusinberre George, M. (1952). Gas turbine power. Scranton, Pa., International Textbook Co.
|
