European engineering research and technology transfer, c. and E. Institution of Mechanical (1991). European Engineering Research and Technology Transfer Congress: papers presented at a series of seminars organized by the Institution of Mechanical Engineers.Birmingham, 2-4 July 1991. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
European Sponsored Turbomachinery, S. (1986). Proceedings of the 1st European Sponsored Turbomachinery Symposium: 27-28 October 1986. London, Mechanical Engineering Publications.
|
Eurotech, D. (1991). Eurotech Direct '91: computers in engineering industry: proceedings of the Institution of Mechanical Engineers: European Engineering Research and Technology Transfer Congress. 1991. Birmingham. Bury St Edmunds, Mechanical Engineering Publications.
|
Eurotech, D. (1991). Eurotech Direct '91: machine systems: proceedings of the Institution of Mechanical Engineers: European Engineering Research and Technology Transfer Congress. 1991. Birmingham. Bury St. Edmunds, Mechanical Engineering Publications.
|
Eurotech, D. (1991). Eurotech Direct '91: materials and processes: proceedings of the Institution of Mechanical Engineers: European Engineering Research and Technology Transfer Congress. 1991. Birmingham. Bury St Edmunds, Mechanical Engineering Publications.
|
Eurotech, D. (1991). Eurotech Direct '91: thermofluids engineering: proceedings of the Institution of Mechanical Engineers: European Engineering Research and Technology Transfer Congress. 1991. Birmingham. Bury St Edmunds, Mechanical Engineering Publications.
|
Eurotech, D. and E. Institution of Mechanical (1991). European Engineering Research and Technology Transfer Congress: papers presented at a series of seminars organized by the Institution of Mechanical Engineers. [et al.]and held at. Birmingham, UK. 1991: Eurotech Direct '91. London, Mechanical Engineering Publications.
|
Eurotech, D. and E. Institution of Mechanical (1991). Eurotech Direct '91: Computers in engineering industry: European Engineering Research and Technology Transfer Congress, 2-4 July 1991, International Congress Centre, Birmingham. Bury St. Edmunds, Published for IMechE by Mechanical Engineering Publications.
|
Eurotech, D. and E. Institution of Mechanical (1991). Eurotech Direct '91: Machine systems: European Engineering Research and Technology Transfer Congress, 2-4 July 1991, International Congress Centre, Birmingham. Bury St Edmunds, Published for IMechE by Mechanical Engineering Publications.
|
Eurotech, D. and E. Institution of Mechanical (1991). Eurotech Direct '91: Materials and processes: European Engineering Research and Technology Transfer Congress, 2-4 July 1991, International Congress Centre, Birmingham. Bury St. Edmunds, Published for IMechE by Mechanical Engineering Publications.
|
Eurotech, D. and E. Institution of Mechanical (1991). Thermofluids engineering: [proceedings of the] European Engineering Research and Technology Transfer Congress, 2-4 July 1991, International Congress [i.e. Convention] Centre, Birmingham. Bury St. Edmunds, Published for IMechE by Mechanical Engineering Publications.
|
Eurtivong, C. (1988). Time-dependent phenomena in uPVC.
|
Evans, C. (1989). Precision engineering: an evolutionary view. Bedford, UK, Cranfield Press.
|
Evans, D. E. (1979). Lister's: the first hundred years. Gloucester (17a Brunswick Rd, Gloucester GL1 1HG), Alan Sutton Publishing Ltd.
|
Evans, F. T. (1995). The Maudslay touch [article]: Henry Maudslay, product of the past and maker of the future.
|
Evans, H. (1978). Vickers, against the odds 1956-1977. London (etc.), Hodder and Stoughton.
|
Everest, A. B. (1952). The engineering properties and applications of spheroidal graphite cast iron. [A paper delivered at the 4th International Mechanical Engineering Congress.], London.
|
Ewald, F., J. J. Clark, et al. (1897). Science and industry. Scranton, Pa., The Coolery enginner company [etc.].
|
Ewins, D. J. (1984). Modal testing: theory and practice. Letchworth, Research Studies.
|
Ewins, D. J. (2000). Modal testing: theory, practice, and application. Taunton, Research Studies Press.
|
Ewins, D. J. and D. J. Inman (2001). Structural dynamics @ 2000: current status and future directions. Baldock, Hertfordshire, England; Philadelphia, PA, Research Studies Press.
|
Ewins, D. J., A. V. Srinivasan, et al. (1983). Vibrations of bladed disk assemblies: presented at the ninth Biennial Conference on Mechanical Vibration and Noise of the Design and Production Engineering Technical Conferences, Dearborn, Michigan, September 11-14, 1983. New York, American Society of Mechanical Engineers.
|
Eyres, G. (2005). An experimental and 3D finity element analysis of a form rolling process. Dublin, Trinity College.
|
Ezeilo, A. N. (1992). Residual stress determinations by neutron and X-ray diffraction methods.
|
Fabbri, S. (1974). Complementi di meccanica applicata alle macchine e macchine: impianti termici, misure di temperatura, pressione e portata, controllo della combustione, misure di potenza: dalle esercitazioni dei corsi intensivi di Meccanica applicata alle macchine e Macchine (per la Sezione elettrotecnica) tenuti dal prof. ing. Sergio Fabbri. Bologna, Pàtron.
|
Fahy, F. J. (1985). Sound and structural vibration: radiation, transmission and response. London, Academic.
|
Fahy, W. G. (1985). Collapse of longitudinally stiffened cylinders subject to axial and pressure loading: 543 leaves, 17 leaves of plates.
|
Fairbairn, S. W. and L. Geological Society of (1860). Useful information for engineers: containing experimental researches on the collapse of boiler flues and the strength of materials, and lectures on popular education and various subjects connected with mechanical engineering, iron ship-building, the properties of steam, etc. London, Longman, Green, Longman and Roberts.
|
Fairbairn, S. W. and W. Pole (1877). The life of Sir William Fairbairn. London, Longmans, Green, and Co.
|
Fairbairn, W. (1851). Two lectures, on the construction of boilers, and on boiler explosions, with the means of prevention: delivered before the Leeds' Mechanics' institution, April, 23 and 24, 1851; also a paper on the consumption of fuel and prevention of smoke, read before the British association for the advancement of science. London, Simpkin, Marshall, and Co.
|
Fairbairn, W. and T. Baines (1869). The rise and progress of manufactures and commerce and of civil and mechanical engineering in Lancashire and Cheshire. [Glasgow], Printed by William Mackenzie, 45 & 47 Howard Street, Glasgow.
|
Fairbairn, W. S. (1859). Three lectures on the rise and progress of civil and mechanical engineering and on popular education. Derby, W. and W. Pike.
|
Fairbairn, W. S. (1860). Useful information for engineers. London, Longman, Green, Longman and Roberts.
|
Fairbairn, W. S. and W. Pole (1877). The life of Sir William Fairbairn, Bart., F.R.S., LL.D., D.C.L: partly written by himself. London, Longmans, Green, and Co.
|
Fairbrother, R. J. (1994). Computer simulation of fuel injection for direct injection diesel engines.
|
Fairhurst, M. (1988). Computer vision for robotic systems: an introduction. New York; London, Prentice Hall.
|
Fairley, T. E. (1986). Predicting the dynamic performance of seats, Original typescript.
|
Falconer, R. A. (1977). Mathematical modelling of jet-forced circulation in reservoirs and harbours.
|
Falk, H. (1987). Microcomputer software for mechanical engineers. New York, Van Nostrand Reinhold Co.
|
Falvey, D. J. and England (1968). Market-the world. A study of success in exporting. Report of a working party of the Economic Development Committee for the Mechanical Engineering Industry. [Chairman, D. J. Falvey.], [London].
|
