Fraser, K. F. (1968). Vibration meter for use with velocity type transducers. Melbourne, Dept. of Supply, Australian Defence Scientific Service, Aeronautical Research Laboratories.
|
Fraser, K. F. (1969). A data acquisition system suitable for airborne applications. Melbourne, Dept. of Supply, Australian Defence Scientific Service, Aeronautical Research Laboratories.
|
Fraser, K. F. (1978). Low pass filtering of data recorded on magnetic tape in frequency modulated form. Melbourne, Australia, Aeronautical Research Laboratories.
|
Frederick, D. and T. S. Chang (1965). Continuum mechanics. Boston, Allyn and Bacon.
|
Free, M. W. (1996). The attenuation of earthquake strong-motion in intraplate regions.
|
Freeman Jeffrey, S., H. Peng, et al., Eds. (1995). Advanced automotive technologies 1995: 5th Symposium: International mechanical engineering congress: Papers. ASME -publications- DSC; vol 56, ASME.
|
Freibott, G., K. Schmalenbach, et al. (1999). Langenscheidts Fachwörterbuch Maschinen- und Anlagenbau: Englisch-Deutsch/Deutsch-Englisch. Berlin; New York, Langenscheidt.
|
Freibott, G., K. Schmalenbach, et al. (2002). Langenscheidts Fachwörterbuch kompakt Maschinenbau: Englisch-Deutsch/Deutsch-Englisch. Berlin; New York, Langenscheidt.
|
Frémond, M. and F. Maceri (2005). Mechanical modelling and computational issues in civil engineering. Berlin, Springer.
|
French, D. J. (1990). Investigations of a novel pile and anchorage concept.
|
French, D. N. (1983). Metallurgical failures in fossil fired boilers. New York; Chichester, Wiley.
|
French, M. J. (1992). Form, structure and mechanism. Basingstoke, Macmillan.
|
Freytag, F., P. Gerlach, et al. (1924). Freytags Hilfsbuch für den Maschinenbau für Maschineningenieure sowie für den Unterricht an technischen Lehranstalten. Berlin, J. Springer.
|
Fridman, V. G. (1946). Mekhanika na zheleznodorozhnom transporte.
|
Friedmann, P., C. I. Chang, et al. (1994). Aeroelasticity and fluid structure interaction problems: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y., American Society of Mechanical Engineers.
|
Friedrich, F. (1967). Standardgerechtes Konstruieren und Zeichnen. Leipzig, Fachbuchverlag.
|
Friedrich, F. (1971). Standardgerechtes Konstruieren und Zeichenen; ein Handbuch für Teilkonstrukteure und Technische Zeichner. Leipzig, Fachbuchverlag.
|
Friedrich, W. (1949). Tabellenbuch für das Metallgewerbe zum Unterricht in Fachkunde, Fachrechnen und Fachzeichnen an berufsbildenden Schulen. Leipzig, Fachbuchverlag.
|
Friedrich, W. (1949). Tabellenbuch für Metallgewerbe; zum Unterricht in Fachkunde, Fachrechnen und Fachzeichnen der Berufs-, Handwerker- und Fachschulen, sowie zum Selbstunterricht und praktischen Gebrauch für Metallgewerbler, Techniker und Werkmeister. Bonn, F. Dümmler.
|
Friedrich, W. (1952). Tabellenbuch für Metallgewerbe. Bonn, F. Dümmler.
|
Friedrich, W. (1959). Tabellenbuch für das Metallgewerbe. Leipzig, Fachbuchverlag.
|
Fritz, J. (1912). Autobiography of John Fritz. New York, American Society of Mechanical Engineers.
|
Fritzsche, C. (1964). Kraft- und Arbeitsmaschinen, Fördertechnik: Russisch-Deutsch, Deutsch-Russisch. Berlin, Verlag Technik.
|
Frolov, K. V. (1986). We count on machine building. [Moscow], Novosti.
|
Fruechte, R. D., M. A. Dorgham, et al. (1983). Application of control theory in the automotive industry. St. Helier, Interscience Enterprises.
|
Fry, M. D. (1994). Optimization of mixture preparation in an S.I. engine.
|
Frydas, C. P. (1985). Forced convection condensation of steam on a horizontal tube in the presence of a non-condensing gas: 358 leaves, 3 leaves of plates.
|
Fryer, B. G. (1990). The practice of construction management. Oxford; Boston, BSP Professional Books.
|
Fu, K. S., R. C. Gonzalez, et al. (1987). Robotics: control, sensing, vision, and intelligence. New York; London, McGraw-Hill.
|
Fueyo Diaz, N. (1990). Two-fluid models of turbulence for axi-symmetrical jets and sprays.
|
Fujikawa, K. (1971). Kikai no shikumi.
|
Fujimasa, I. (1996). Micromachines: a new era in mechanical engineering. Oxford; New York, Oxford University Press.
|
Fulton, R. E., D. Agonafer, et al., Eds. (1994). CAE/CAD application to electronic packaging: Session: International mechanical engineering congress: Papers, ASME.
|
Funaioli, E. (1970). Corso di meccanica applicata alle macchine. Bologna, R. Pàtron.
|
Funke, E. R., F. T. Stock, et al. (1968). A digital program for on-line correlation and power spectral density analysis. [Ottawa, National Research Council of Canada.
|
Funkenbusch, P. D. (2005). Practical guide to designed experiments: a unified modular approach. New York, Marcel Dekker.
|
Furness, R. J. and D. American Society of Mechanical Engineers Manufacturing Engineering, Eds. (2000). Proceedings of the ASME manufacturing engineering division 2000, ASME.
|
Furness, R. J., S. M. Athavale, et al. (2000). Proceedings of the ASME Manufacturing Engineering Division, 2000: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y., American Society of Mechanical Engineers.
|
Furness, R. J., X. J. R. Avula, et al. (1998). Proceedings of the ASME Dynamic Systems and Control Division, 1998: presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California. New York, American Society of Mechanical Engineers.
|
Furness, T. A. (1981). The effects of whole-body vibration on the perception of the helmet-mounted display, Original typescript.
|
