Harland, P. W. and U. S. G. D. Ametek Inc (1985). Pressure gauge handbook. New York, N.Y., M. Dekker.
|
Harman, W. W. and D. W. Lytle (1962). Electrical and mechanical networks: an introduction to their analysis. New York; London, McGraw-Hill.
|
Harman, W. W. and D. W. Lytle (1962). Electrical and mechanical networks. New York; London, McGraw-Hill.
|
Harnoy, A. (2003). Bearing design in machinery: engineering tribology and lubrication. New York, Marcel Dekker.
|
Harral, B. B. and E. Great Britain. Health and Safety (1992). Rops test criteria for 40 km/h agricultural and forestry tractors: Rops test procedures for tractors with mass below 600 kg and track width below 1150 mm. London, HMSO.
|
Harries, C. J. (1985). The use of ultrasound for detecting particles suspended in lubricant and hydraulic fluids: 267 leaves, [9] leaves of plates.
|
Harris John, N. (1983). Mechanical working of metals: theory and practice. Oxford, Pergamon Press.
|
Harris, C. J. (1994). Advances in intelligent control. London; Bristol, PA, Taylor & Francis.
|
Harris, C. J. and Inspec (1988). Application of artificial intelligence to command & control systems, Pereginus on behalf of the Institution of Electrical Engineers, c1988.
|
Harris, C. J., C. G. Moore, et al. (1993). Intelligent control: aspects of fuzzy logic and neural nets. Singapore; London, World Scientific Publishing.
|
Harris, C. J., S. A. Billings, et al. (1985). Self-tuning and adaptive control: theory and applications. London, Peter Peregrinus on behalf of the Institution of Electrical Engineers.
|
Harris, C. M. and C. E. Crede (1977). Shock and vibration handbook. New York; London [etc.], McGraw-Hill.
|
Harris, H. C. (1927). Motive power engineering for students of mining and mechanical engineering: dealing with the theory and practice of steam plant, air compressors, and internal combustion engines. London; New York, Pitman.
|
Harris, J. R. (1900). The life of Francis William Crossley. London, James Nisbet and Co.
|
Harris, L., M. Jenkin, et al. (1993). Spatial vision in humans and robots: the proceedings of the 1991 York Conference on Spatial Vision in Humans and Robots. Cambridge, Cambridge University Press.
|
Harris, N. C. and E. M. Hemmerling (1955). Introductory applied physics. New York; London, McGraw-Hill.
|
Harrison Howard, L. and G. Bollinger John (1969). Introduction to automatic controls. 2nd ed. London, Intertext Books.
|
Harrison, H. L. (1964). Control system fundamentals. Scranton, International Textbook Co.
|
Harrison, H. L. and J. G. Bollinger (1969). Introduction to automatic controls. London, Intertext Books.
|
Harrison, J. H. (1985). On the hydrodynamics of compliant semisubmersibles: 293 leaves, 2 leaves of plates.
|
Harsokoesoemo, D., Nastopo, et al. (1979). Daftar istilah teknik mesin, Inggris-Indonesia. [Bandung], Lab Elemen Mesin, Departemen Mesin, ITB.
|
Hart, I. B. and J. Watt (1962). James Watt, pioneer of mechanical power. London, Weidenfeld & Nicholson.
|
Hartenberg Richard, S. and J. Denavit (1964). Kinematic Synthesis of Linkages. [With illustrations.]. New York, McGraw-Hill Book Co.
|
Hartenberg, R. S. (1979). National historical mechanical engineering landmarks, Asme.
|
Hartenberg, R. S. and C. American Society of Mechanical Engineers. History and Heritage (1979). National historic mechanical engineering landmarks. New York, The American Society of Mechanical Engineers.
|
Hartenberg, R. S. and J. Denavit (1964). Kinematic synthesis of linkages. New York; London, McGraw-Hill.
|
Hartlib, S. and C. Dymock (1651). An invention of engines of motion lately brought to perfection. Whereby may be dispatched any work now done in England or elsewhere, (especially works that require strength and swiftness) either by wind, water, cattel or man. London, Printed by I. C. for R. Woodnoth.
|
Harvey and Company, L. (1973). Illustrated and descriptive catalogue of machinery, tools, & general ironwork manufactured by Harvey & Co., Limited. Truro, Barton.
|
Harvey, P., J. C. O. Arup, et al. (1999). Standard specification for the commissioning of mechanical engineering services installations for buildings. Horsham, CSA.
|
Harwood, N. (1932). Experimental engineering science: a text-book for students preparing for the national certificate examination in mechanical engineering, London.
|
Harwood, N. (1932). Experimental engineering science: a textbook for students preparing for the National Certificate Examination in mechanical engineering. London, Pitman.
|
Hasan, A. Y. and M. r. Taqi al-Din Muhammad ibn (1976). Taqi al-Din wa-al-handasah al-mikanikiyah al-`Arabiyah: ma`a Kitab al-Turuq al-saniyah fi al-alat al-ruhaniyah min al-qarn al-sadis `ashar. Halab, Jami`at Halab, Ma`had al-Turath al-`Ilmi al-`Arabi.
|
Hasan, A. Y. and M. r. Taqi al-Din Muhammad ibn (1976). Taqi al-Din wa-al-handasah al-mikaniyah al-`Arabiyah: ma`a Kitab al-turuq al-saniyah fi al-alat al-ruhaniyah min al-qarn al-sadis `ashar. [Halab], Ma`had al-Turath al-`Ilmi al-`Arabi, Jami`at Halab.
|
Hasan, A. Y., M. r. Taqi al-Din Muhammad ibn, et al. (1976). Taqi al-Din wa-al handasah al-mikanikiyah al-`Arabiyah. Aleppo, Syria, Institute for the History of Arabic Science, University of Aleppo.
|
Hasan, M. H. (1992). A graph-theoretical approach to the facility layout problem.
|
Hasan, R. G. M. (1990). Numerical prediction of flow in curved ducts and volute casings.
|
Haseeb, A. S. M. A. and Institution of Engineers (Bangladesh). Mechanical Engineering Division. (1996). Proceedings: Third Annual Paper Meet, Mechanical Engineering Division, the Institution of Engineers, Bangladesh, 31 Oct.-02 Nov. 1996, Chittagong. Dhaka, The Division.
|
Hashemi, S. (1983). Fracture from flaws in polymers: 331 leaves, 62 leaves of plates.
|
Hassan Mohamed, F., M. Megahed Said, et al. (2000). Current advances in mechanical design and production VII: proceedings of the Seventh Cairo University International MDP Conference. Amsterdam; Oxford, Pergamon.
|
Hassan Yassin, A., C. H. Cho, et al., Eds. (1998). Proceedings of the ASME Nuclear Engineering Division: 1998: CFD and thermal hydraulic analysis in nuclear reactors, ASME.
|
