Hayes, L. J., R. B. Roemer, et al. (1994). Advances in heat and mass transfer in biological systems: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Hayes, L. J., R. B. Roemer, et al., Eds. (1994). Advances in heat and mass transfer in biological systems: Symposium: International mechanical engineering congress: Papers, ASME.
|
Hayes, L. J., S. Clegg, et al. (1996). Advances in heat and mass transfer in biotechnology 1996: presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia. New York, American Society of Mechanical Engineers.
|
Haynes, N. A. P. (1985). Reliable digital controllers for automobiles, Original typescript.
|
Hayward-Tyler & company London. (1942). Machine speeds and feeds; a unique collection of tables and data relating to machining operations on cast iron, steels and alloy steels, aluminum, and aluminium alloys, and other non-ferrous metals. Brooklyn, N.Y., Chemical publishing company, inc.
|
Haywood, R. W. (1986). Analysis of engineering cycles: worked problems; power, refrigerating and gas liquefraction plant. Oxford [Oxfordshire]; New York, Pergamon Press.
|
Hazelhof, B., A. Hensen, et al. (1964). Constructieleer voor metaalbewerkers. Groningen, J. B. Wolters.
|
Hazenberg, J. G. (2004). The cellular transducer in damage-stimulated bone remodelling. Dublin, Trinity College.
|
He, J. (1988). Identification of structural dynamic characteristics.
|
Hearn, D. R., L. W. Hillen, et al. (1972). High temperature fuel cells: charts for thermodynamic equilibria and carbon deposition in the C-H-O systems. Melbourne, ARL.
|
Heath, J. B. and C. Commission of the European Communities. Directorate-General for (1975). A study of the evolution of concentration in the mechanical engineering sector for the United Kingdom. [Luxembourg, Office for Official Publications of the European Communities].
|
Heath, J. B. and C. Commission of the European Communities. Directorate-General for (1975). A study of the evolution of concentration in the United Kingdom mechanical engineering industry: concentration tables. Luxembourg, Office for Official Publications of the European Communities.
|
Heath, L. (1985). Fundamentals of robotics: theory and applications. Reston, Va, Reston Pub. Co.
|
Heather Henry James, S. (1912). Electrical Engineering for Mechanical and Mining Engineers. Being a series of twenty lectures prepared for and delivered to the resident mechanical engineers of the mines of the Witwatersrand, South Africa. London, "The Electrician" Printing & Publishing Co.
|
Heather, H. J. S. (1912). Electrical engineering for mechanical and mining engineers, London.
|
Heck, R. C. H. (1903). A manual for the course in engineering laboratory. Mechanical engineering department, Lehigh university. [Bethlehem, Pa., Keystone press].
|
Heilich, F. W. and E. E. Shube (1983). Traction drives: selection and application. New York, Dekker.
|
Heising, C. D., T. J. Connolly, et al. (1978). Analyzing the reprocessing decision: plutonium recycle and nuclear proliferation: final report, November 1978. Palo Alto, Calif., EPRI.
|
Heitland, H. and A. L. Mudaliar (1970). The Vice-Chancellor Sir A. L. Mudaliar Lectureship in technology (1968-69). [Madras], University of Madras.
|
Heitor, M. F. T. d. V. (1985). Experiments in turbulent reacting flows: 491 leaves.
|
Hellan, K. (1967). Analysis of rectangular plates in stationery creep bending. Trondheim, Norges tekniske vitenskapsakademi.
|
Hellevaara, M., M. a. M. E. Vtt Manufacturing Technology, et al., Eds. (1997). Maritime safety '97, VTT.
|
Hellings, J. E. (1989). The strength and stiffness of soils associated with excavations.
|
Helsdon, R. M. (1965). Introduction to applied thermodynamics. Oxford; New York, Pergamon Press.
|
Helsdon, R. M. (1968). Mechanical engineering science for G1, G2, T1 & T2 courses, Van Nostrand.
|
Helsdon, R. M. (1968). Mechanical engineering science for G1, G2, T1 and T2 courses. London; Princeton, N.J. [etc.], Van Nostrand.
|
Helsinki University of Technology Department of Mechanical Engineering Laboratory of Engineering, M. (1999). Stainless steels in transport industry, [np].
|
Hemelrijck Danny, V., A. Anastassopoulos, et al., Eds. (1996). Non destructive testing, A.A.Balkema.
|
Hemelrijck Danny, v., A. Anastassopoulos, et al., Eds. (2000). Emerging technologies in NDT: proceedings of the 2nd international conference, Balkema.
|
Henau Vincent, d. and W. University of (1992). A study of terrain-induced slugging in two-phase flow pipelines: a thesis presented to the University of Waterloo in fulfilment of the thesis requirement for the degree of Doctor of Philosophy in Mechanical Engineering. Canadian theses on microfiche. Waterloo [Ont.], [University of Waterloo].
|
Henderson, A. and J. Lockey (1972). Mechanical technology for higher technicians. London, Collins.
|
Henkel, D. J. (1958). The correlation between deformation, pore water pressure and strength characteristics of saturated clays.
|
Hennessey, R. A. S. (1972). Power. London, B.T. Batsford.
|
Henriksen, H. R., G. Haug, et al. (1991). Survey of academic recognition within the framework of ICP's in the field of mechanical engineering. Brussels, European Society for Engineering Education.
|
Henry, S. D., K. S. Dragolich, et al. (1996). ASM handbook. Materials Park, OH, ASM International.
|
Hernandez-Guerrero, A. and American Society of Mechanical Engineers. Advanced Energy Systems Division. (2001). Proceedings of the ASME Advanced Energy Systems Division--2001: presented at the 2001 ASME International Mechanical Engineering Congress and Exposition: November 11-16, 2001, New York, New York. New York, New York, American Society of Mechanical Engineers.
|
Hernes, T., D. Miles, et al. (1987). Construction management programme: interactive contractor training. Geneva, ILO.
|
Hero, o. A., L. Qusta ibn, et al. (1988). Les mechaniques: ou, l'elevateur des corps lourds. Paris, Les Belles Lettres.
|
Herrmann Klaus, P., H. Larsson Lars, et al. (1987). Fracture of non-metallic materials: 5th Advanced seminar on fracture mechanics: Papers. Dordrecht, Holland; Boston; Hingham, MA, D. Reidel Pub. Co.: Sold and distributed in the U.S.A. and Canada by Kluwer Academic Publishers.
|
Herrmann Klaus, P., L. H. Larsson, et al. (1987). Fracture of non-metallic materials: proceedings of the 5th Advanced Seminar on Fracture Mechanics. Ispra, Italy, 14-18 October, 1985. Dordrecht; Lancaster, Reidel.
|
