Higher Education Funding Council for, W. (1993). University of Wales, Swansea: mechanical engineering: October 1993: quality assessment report. Cardiff, Higher Education Funding Council for Wales.
|
Higher Education Funding Council for, W. (1993). University of Wales, Swansea: mechanical engineering, Higher Education Funding Council for Wales.
|
Higher Education Funding Council for, W. (1994). North East Wales Institute, mechanical engineering: January 1994: quality assessment report. Cardiff, Higher Education Funding Council for Wales.
|
Higher Education Funding Council for, W. (1994). Swansea Institute of Higher Education, mechanical engineering: January 1994: quality assessment report. Cardiff, Higher Education Funding Council for Wales.
|
Higher Education Funding Council for, W. (1994). University of Glamorgan: mechanical engineering: February 1994: quality assessment report. Cardiff, Higher Education Funding Council for Wales.
|
Higher Education Funding Council for, W. (1994). University of Wales College of Cardiff: mechanical engineering: January 1994: quality assessment report. Cardiff, Higher Education Funding Council for Wales.
|
Higher Education Funding Council for, W. (1994). University of Wales College of Cardiff: mechanical engineering, Higher Education Funding Council for Wales.
|
Hight, D. W. (1983). Laboratory investigations of sea-bed clays: 2v., 787 leaves, 38 leaves of plates.
|
Higuerey Perez, P. R. (1985). Estimation of trip matrices for rapid transit systems using low cost data: 93 leaves.
|
Hilger and Watts, L. (1970). Instruction Manual.
|
Hill, B. J. (1971). Analysis of confined jet flows with applications to the design of jet pumps.
|
Hill, C. R. (1994). Software design for interactive engineering simulation.
|
Hill, D. (1991). Arabic mechanical engineering [article]: a survey of the historical sources.
|
Hill, D. R. (1991). Mechanical engineering in the medieval Near East [article]: Muslim engineers preserved earlier technology as basic as the crank, the windmill and the suction pump.
|
Hill, D. R. and D. A. King (1998). Studies in Medieval Islamic technology: from Philo to al-Jazari, from Alexandria to Diyar Bakr. Aldershot, England; Brookfield, VT, Ashgate.
|
Hill, J. W. (1883). A pocket manual for engineers. Providence, R.I., W. A., Harris.
|
Hill, J., H. L. Jackson, et al. (2001). Mechanical engineering principles: statics and dynamics. Edinburgh, Heriot-Watt University, SCHOLAR Unit.
|
Hill, J., H. L. Jackson, et al. (2001). SCHOLAR study guide. Edinburgh, Heriot-Watt University, SCHOLAR Unit.
|
Hill, N. P. (1984). Behaviour and removal of chlorophenoxy herbicides during wastewater treatment: 201 leaves, 2 leaves of plates.
|
Hill, P. H. (1959). Problems in graphical analysis. New York, McGraw-Hill Book Company, inc.
|
Hill, P. H. and W. P. Rule (1960). Mechanisma: analysis and design. Boston, Allyn and Bacon.
|
Hillary, B. (1983). Indirect measurement of vibration excitation forces: 251 leaves, 2 leaves of plates.
|
Hillen, L. W. and D. R. Warren (1976). Hydrocarbon fuels from solar energy via the alga Botryococcus braunii. Melbourne, Aeronautical Research Laboratories.
|
Hillier Marcus, J. and J. Hannah (1973). Mechanical engineering science. 1st metric ed. (Reprinted.). London, Pitman.
|
Hills, C. D. (1993). The hydration of ordinary Portland cement during cement-based solidification of toxic wastes.
|
Hills, R. L. (2002). James Watt. Ashbourne, Landmark.
|
Hills, R. L. (2002). Life and inventions of Richard Roberts, 1789-1864. Ashbourne, Landmark.
|
Hilyard, N. C. and N. British Conference on the Teaching of Vibration and (1977). Proceedings of the Second British Conference on the Teaching of Vibration and Noise, held in Sheffield City Polytechnic, 5-7 July 1977. Sheffield, [Sheffield City Polytechnic, Industrial Liaison Centre].
|
Himasekhar, K., A. M. Division, et al., Eds. (1994). Advances in computer-aided engineering (CAE) of polymer processing: Symposium: International mechanical engineering congress: Preprints. MD; vol 49, ASME.
|
Himasekhar, K., American Society of Mechanical Engineers. Materials Division., et al. (1994). Advances in computer-aided engineering (CAE) of polymer processing: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y., American Society of Mechanical Engineers.
|
Himmelman, W. A. (1980). Solar engineering for domestic buildings. New York, M. Dekker.
|
Hingley, C. G. (1964). Pitting in rolling contact.
|
Hinkelbein, A. (1971). Energy and power. London; New York, Collins: F. Watts.
|
Hinze, J. O. (1959). Turbulence: an introduction to its mechanism and theory. New York; London, McGraw-Hill.
|
Hinze, J. O. (1975). Turbulence. New York; London, McGraw-Hill.
|
Hirji, K. A. A. (1986). Combustion measurements in pulverised coal flames: 194 leaves.
|
Hirsch, J. (1883). Rapport sur les machines et les appareils de la mécanique générale. Paris, Imprimerie nationale.
|
Hiscox, G. D. (1899). Mechanical movements, powers, devices and appliances, used in constructive and operative machinery and the mechanical arts. New York, N. W. Henley & company.
|
Histand, M. B. and D. G. Alciatore (1999). Introduction to mechatronics and measurement systems. Boston; London, WCB McGraw-Hill.
|
Hitchcock, E. A. and M. Weed (1939). My 50 years in engineering; the autobiography of a human engineer. Caldwell, Idaho, The Caxton Printers, ltd.
|
