Humber, W. (1868). A Record of the Progress of Modern Engineering: comprising civil, mechanical, marine, hydraulic. and other engineering works, with essays and reviews, London.
|
Humber, W. and P. Periodical (1863). A Record of the Progress of Modern Engineering; comprising civil, mechanical, marine, hydraulic. and other engineering works, with essays and reviews. Edited by W. Humber. 1863-66, London.
|
Humphrey, J. A. C. (1977). Flow in ducts with curvature and roughness.
|
Humphreys, H. (1993). Clociau mawr a modelau bach. Capel Garmon, Gwasg Carreg Gwalch.
|
Hundal, M. S. (2002). Mechanical life cycle handbook: good environmental design and manufacturing. New York, Marcel Dekker.
|
Hung, S. M. (1988). Second order wave forces on bodies in regular and bichromatic seas.
|
Hunt, J. B. (1979). Dynamic vibration absorbers. London, Mechanical Engineering Publications.
|
Hunt, K. H. (1979). Kinematic geometry of mechanisms. Oxford; New York, Clarendon Press: Oxford University Press.
|
Hunt, S. E. (1987). Nuclear physics for engineers and scientists: low energy theory with applications including reactors and their environmental impact. Chichester; New York, E. Horwood: Halsted Press.
|
Hunt, T. M. (1993). Handbook of wear debris analysis and particle detection in liquids. London; New York, Elsevier Applied Science.
|
Hunter, B. (1996). Shared control for teleoperation using a Lie group approach.
|
Hunter, M. (1987). Behaviour of nitrilotriacetic acid in the wastewater disposal and water refuse cycle: 240 leaves, [3] leaves of plates.
|
Hurlow, J. W. (1969). Examples in engineering science for mechanical engineering technicians. London, Blackie.
|
Hurst, K. S. and Seed (1990). Component selection: spring. [Hatfield?], SEED in association with the Design Council.
|
Hurst, K. S. and Seed (1990). Component selection. [Hatfield?], SEED in association with the Design Council.
|
Hurst, K. S. and Seed (1992). Unit selection: shaft/hub connections. [Hatfield?], SEED in association with the Design Council.
|
Husband, T., D. Institution of Mechanical Engineers. Manufacturing Industries, et al. (1986). U.K. research in advanced manufacture. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
Hussien, A. M. M. (1990). Measurements in a turbulent counterflow flame.
|
Huston, R. L. and C. E. Passerello (1984). Finite element methods: an introduction. New York, M. Dekker.
|
Huston, R. L. and C. Q. Liu (2001). Formulas for dynamic analysis. New York, Marcel Dekker.
|
Hutchins, M. G. (1996). Upland catchment hydrochemistry: an integrated modelling and field characterisation.
|
Hutchinson Francis, W. (1957). Thermodynamics of Heat-Power Systems. [With charts.]. Reading, Mass., Addison-Wesley Publishing Co.
|
Hutchinson, F. W. (1957). Thermodynamics of heat-power systems. Reading, Mass., Addison-Wesley Pub. Co.
|
Hutchinson, J. M. (1990). Particle and bubble filtration using ultrasonic standing waves.
|
Hutton Frederic, R. (1897). The Mechanical Engineering of Power Plants, etc. New York, Wiley & Sons.
|
Hutton Frederic, R. (1899). Heat and Heat-Engines. A study of the principles which underlie the mechanical engineering of a power plant. New York, J. Wiley & Sons.
|
Hutton, D. V. (1981). Applied mechanical vibrations. New York; London, McGraw-Hill.
|
Hutton, D. V. (2004). Fundamentals of finite element analysis. Boston, McGraw-Hill.
|
Hutton, F. R. (1897). Mechanical engineering of power plants, New York.
|
Hutton, F. R. (1908). The mechanical engineering of steam power plants. New York, J. Wiley & sons; [etc.
|
Hutton, W. S. (1888). The practical engineer's hand-book: comprising a treatise on modern engines and boilers. London, Crosby Lockwood.
|
Hutton, W. S. (1896). Practical engineer's hand-book: comprising a treatise on modern engines and boilers, marine, locomotive, and stationary; and containing a large collection of rules and practical data relating to recent practice in designing. the whole constituting a comprehensive key to the Board of Trade and other examinations for certificates of competency in modern mechanical engineering. London, C. Lockwood.
|
Hutton, W. S. (1901). The works' manager's hand-book of modern rules, tables, and data for civil and mechanical engineers, millwrights, and boiler makers; tool makers, machinists, and metal workers; iron and brass founders, etc., etc: In six sections: I. Stationary and locomotive steam engines, gas engines. II. Hydraulic memoranda; pipes, pumps, waterpower. III. Millwork; shafting, gearing, pulleys. IV. Steam-boilers, safety valves, factory chimneys. V. Heat, warming and ventilating; melting, cutting, and finishing metals; alloys and casting; wheel-cutting; screw-cutting. VI. Strength and weight of materials; workshop data, &c. London, C. Lockwood and co.
|
Hutton, W. S. (1902). The practical engineer's hand-book: comprising a treatise on modern engines and boilers, marine, locomotive, and stationary, and containing a large collection of rules and practical data relating to recent practice in designing and constructing all kinds of engines, boilers, and other engineering work. The whole constituting a comprehensive key to the Board of Trade and other examinations for certificates of competency in modern mechanical engineering. London, C. Lockwood and Son.
|
Hutton, W. S. and E. Pull (1938). The works' manager's handbook of rules, formulae, tables, and data: for civil and mechanical engineers, London.
|
Hutton, W. S., Steinmetz, et al. (1892). Companion to 'The works' manager's hand-book.' The practical engineer's hand-book comprising a treatise on modern engines and boilers marine, locomotive, and stationary. And containing a large collection of rules and practical data relating to recent practice in designing and constructing all kinds of engines, boilers, and other engineering work. The whole constituting a comprehensive key to the Board of Trade and other examinations. [London], [Crosby Lockwood and Son].
|
Hwang, T. H., R. N. Smith, et al. (1994). Challenges of high temperature heat transfer equipment: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Hwang, T. H., R. N. Smith, et al., Eds. (1994). Challenges of high temperature heat transfer equipment: Session: International mechanical engineering congress: Papers, ASME.
|
Hyde, T. (1981). Some factors affecting journey-times on urban roads: 217 leaves.
|
Hyde, T. H., E. Ollerton, et al. (1990). Applied stress analysis: International conference: Papers, Elsevier Applied Science.
|
