Institution of Mechanical Engineers. Automobile, D., D. Institution of Mechanical Engineers. Power Industries, et al. (1982). Diesel engines for passenger cars and light duty vehicles: proceedings of a conference [held on] 5-7 October 1982 [at] the Institution of Mechanical Engineers, London. [Bury St. Edmunds], Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Automobile, D., E. Advanced School of Automobile, et al. (1966). Proceedings of a symposium jointly sponsored by the Institution of Mechanical Engineers, Automobile Division and the Advanced School of Automobile Engineering, 5-6th July 1966. London, Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Automobile, D., S. Cranfield Institute of Technology. School of Automotive, et al. (1973). Conference on Vehicle Safety Legislation: its Engineering and Social Implications: [proceedings]. London, Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Combustion Engines, G. (1985). Diesels, gas turbines, and their systems - the need for reliability: papers presented at a seminar. which took place at the Institution of Mechanical Engineers on 19 September 1985. London, Mechanical Engineering Publications for the Institution.
|
Institution of Mechanical Engineers. Combustion Engines, G. (1987). Design and operation of engines in hazardous atmospheres: papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers and held. on 3 September 1987. London, Mechanical Engineering Publications Limited for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Combustion Engines, G. (1989). The benefits of electronic control systems for internal combustion engines: papers presented at a Seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 19 January 1989. London, Published by Mechanical Engineering for Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Combustion Engines, G. (1990). Gas engines and co-generation: papers presented at a Seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers, and held at the National Motor Museum, Solihull, West Midlands, on 10/11 May 1990. London, Published by Mechanical Engineering Publications Limited for the Institution of Mechanical Enginers.
|
Institution of Mechanical Engineers. Combustion Engines, G. (1993). Experimental and predictive methods in engine research and development: international conference, 17-18 November 1993, National Exhibition Centre, Birmingham. Bury St. Edmunds, Mechanical Engineering Publications for IMechE.
|
Institution of Mechanical Engineers. Combustion Engines, G. (1995). Diesel fuel injection systems: papers presented at a seminar organized by the Combustion Engines Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 28-29 September 1995. London, Mechanical Engineering Publications for The Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Control Systems and Computing Techniques, G. and E. Institution of Electrical (1980). Systems engineering in land transport: conference [London, 1980]. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Energy and Thermofluid Mechanics, G. (1993). Engineering applications of computational fluid dynamics: European conference, 7-8 September 1993, Institution of Mechanical Engineers, Birdcage Walk, London. Bury St. Edmunds, Published for IMechE by Mechanical Engineering.
|
Institution of Mechanical Engineers. Energy and Thermofluid Mechanics, G. (1993). Engineering applications of computational fluid dynamics: proceedings of the Institution of Mechanical Engineers: European conference, 7-8 September 1993. London. Bury St. Edmunds, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Energy Transfer and Thermofluid Mechanics, G. (1996). Latest advances in the aerodynamics of turbomachinery with special emphasis upon unsteady flows: 9-10 December 1996. Bury St Edmunds, Mechanical Engineering Publications Ltd. for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering in Medicine Section, C. and A. British Orthopaedic (1980). Engineering aspects of the spine: conference sponsored [i.e. organised] by the Engineering in Medicine Section Committee of the Institution of Mechanical Engineers and the British Orthopaedic Association, 7-9 May 1980, Institution Headquarters. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering in Medicine Section, C. and A. British Orthopaedic (1980). Engineering aspects of the spine: conference sponsored by the Engineering in Medicine Section Committee of the Institution of Mechanical Engineers and the British Orthopaedic Association. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Engineering in Medicine, G. (1986). Heart valve engineering: papers presented at a seminar organized by the Engineering in Medicine Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 4-5 December, 1986. London, Published by Mechanical Engineering Publications for The Institution.
|
Institution of Mechanical Engineers. Engineering in Medicine, G. (1988). Biomechanics in sport: papers prepared for the Engineering in Medicine Group of the Institution of Mechanical Engineers. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering in Medicine, G., A. British Orthopaedic, et al. (1989). The changing role of engineering in orthopaedics: proceedings of the Institution of Mechanical Engineers international conference, 14-15 April 1989.London. Bury St. Edmunds, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Manufacturing Engineering, D., E. Association of Mechanical, et al. (1984). Contamination control in hydraulic systems. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Engineering Manufacturing Industries, D. (1983). Vehicle recovery road and rail: sponsored by the Engineering Manufacturing Industries Division and co-sponsored by the Automobile and Railway Divisions of the Institution of Mechanical Engineers and the Association of Vehicle Recovery Operators: 1-3 June 1983, Cairn Hotel, Harrogate. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Manufacturing Industries, D. (1984). Microprocessors in fluid power engineering. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Engineering Manufacturing Industries, D. (1984). UK robotics research 1984. London, Published for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Manufacturing Industries, D. (1993). Successful management for safety: papers presented at a meeting organized by the Engineering Manufacturing Industries Division of the Institution of Mechanical Engineers in association with the Hazards Forum and held at the Institution of Mechanical Engineers on 12-13 October 1993. London, Published by Mechanical Engineering Publications Limited for The Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Manufacturing Industries, D. and E. Institution of Production (1982). Desk top computing for engineers: seminar sponsored by the Engineering Manufacturing Industries Division of the Institution of Mechanical Engineers and the Institution of Production Engineers. London, Published by Mechanical Engineering Publications Limited for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Manufacturing Industries, D. and E. Institution of Production (1982). Getting robots and automation systems to work: appraisal, installation, maintenance and safety: 1 November 1982, The Institution of Mechanical Engineers, 1 Birdcage Walk, Westminster, London. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Engineering Sciences, D. and A. Joint British Committee for Stress (1981). Engineering research and design - bridging the gap: papers originally prepared for a conference sponsored by the Engineering Sciences Division of the Institution of Mechanical Engineers and the Joint British Committee for Stress Analysis. London, Published by Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Sciences, D. and A. Joint British Committee for Stress (1981). Engineering research and design: bridging the gap; papers originally prepared for a conference sponsored by the Engineering Sciences Division of the Institution of Mechanical Engineers and the Joint British Committee for Stress Analysis. London, Published by Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Services, G. (1986). Clean room design: papers presented at a seminar held at the Institution of Mechanical Engineers on 29th of January 1986. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Engineering Services, G. (1986). Clean room design: papers presented at a seminar organized by the Engineering Services Group of the Institution of Mechanical Engineers on 29 January 1986. London, Mechanical Engineering publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1989). The King's Cross Underground fire: fire dynamics and the organization of safety: papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 1 July [i.e. June] 1989. London, Mechanical Engineering Publications for the Institute of Mechanical Engineers.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1990). Engineering a quieter Europe: proceedings of the Institution of Mechanical Engineers. 1990. Birmingham. Bury St. Edmunds, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1990). Engineering a quieter Europe. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1991). Computational fluid dynamics for the environmental and building services engineer - tool or toy: papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers. 1991, [London]. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1991). Computational fluid dynamics for the environmental and building services engineer: tool or toy? papers presented at a Seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 26 November 1991. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1991). Engineering for profit from waste: proceedings of the Institution of Mechanical Engineers: European Conference. 1991. Düsseldorf. London, Mechanical Engineering Publications Ltd.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1992). Practical and design aspects of small-scale CHP for building services' engineers: papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers. 1992. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1993). Effective resource management in industry: papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers and held. on 20 January 1993. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1993). Waste: handling, processing, and recycling: papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 27 April 1993. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1993). Waste: handling, processing, and recycling: papers presented at a seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers. 1993. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Environmental Engineering, G. (1994). Engineering for profit from waste IV: conference: 9-11 November 1994, Institution of Mechanical Engineers, Birdcage Walk, London. Bury St. Edmunds, Mechanical Engineering Publications.
|
