Institution of Mechanical Engineers. Environmental Engineering, G. and I. Verein Deutscher (1991). Engineering for profit from waste: European conference: 15-17 April 1991, Hilton International, Düsseldorf. Bury St. Edmunds, Published for IMechE by Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Environmental Engineering, G., T. Centre for Exploitation of Science and, et al. (1991). Opportunities for consumer waste recycling: papers presented at a Seminar organized by the Environmental Engineering Group of the Institution of Mechanical Engineers in association with the Centre for the Exploitation of Science and Technology, and held at the Institution of Mechanical Engineers on 26 September 1991. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery Committee, S. (1992). Rotating equipment for the water and sewage industries: Papers presented at a seminar organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 25 March 1992. London, Published by Mechanical Engineering for the Insitution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. (1988). Gas and liquid pulsations in piping systems: prediction and control: papers presented at a seminar organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 1-2 December 1988. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. (1988). Use of CAD/CAM for fluid machinery design and manufacture: papers presented at a seminar held at the Institution of Mechanical Engineers, 21 January 1988. London, Mechanical Engineering Publications Limited for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. (1990). Application of advanced material technology in fluid machinery: papers presented at a seminar organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 27 February 1990. Bury St. Edmunds, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. (1993). Turbo compressor and fan stability: papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 8 April 1993. London, Published by Mechanical Engineering Publications Limited for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. (1993). Using computers in the design and selection of fluid machinery: papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 2 December 1993. London, Published by Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. (1994). Fans for hazardous applications: papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 4 October 1994. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. and E. Institution of Mechanical (1990). Vibrations in centrifugal pumps: papers presented at a seminar organised by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 11 December 1990. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C. and E. Seminar on Applications of Materials Technology in (1992). Applications of materials technology in engines: papers presented at a seminar organized by the Fluid Machinery Committee of the Instit- ution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 21 October 1992. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, C., T. Centre Technique des Industries Aerauliques et, et al. (1993). Installation effects in fan systems: papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers and held at the Institution. on 28 September 1993. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Fluid Machinery, G. and U. Atomic Energy Research Establishment. Energy Technology Support (1995). Energy saving in the design and operation of fans: papers presented at a seminar organized by the Fluid Machinery Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 9 March 1995. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Hydraulic Plant and Machinery, G. (1964). The application of hydraulics to mobile equipment for agriculture, construction, and industry: [proceedings of] a convention arranged by the Hydraulic Plant and Machinery Group, Institution of Mechanical Engineers. London, Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Industrial Administration and Engineering Production, G. and S. Informal Discussion on the Reliability of Mechanical Engineering Parts of Data Processing (1961). Proceedings of the informal discussion on the reliability of mechanical engineering parts of data processing systems. London, Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Internal Combustion Engines, G. and V. Symposium on the Use of High Speed Diesel Engines in Deep-sea Fishing (1962). Proceedings of the symposium on the use of high speed diesel engines in deep-sea fishing vessels, March 1962. London, Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. International, C. and G. Institution of Mechanical Engineers. Pressurized Systems (1991). Management of in-service inspection of pressure systems: International Conference, 12-13 March 1991, Institution of Mechanical Engineers, Birdcage Walk, London, Published for IMechE by Mechanical Engineering, 1991.
|
Institution of Mechanical Engineers. International, C., G. Institution of Mechanical Engineers. Combustion Engines, et al. (1989). Second International Conference, Combustion engines, reduction of friction and wear: 19-20 September 1989, The Institution of Mechanical Engineers, Birdcage Walk, London. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications Limited.
|
Institution of Mechanical Engineers. Manipulative and Mechanical Handling Machinery Group. Postal Engineering, S. (1975). Electro-optical equipment in mechanical handling and sorting: conference sponsored [and organised] by the Postal Engineering Section of the Manipulative and Mechanical Handling Machinery Group and co-sponsored by the Institution of Electronic and Radio Engineers, London, 7 May 1974. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Manufacturing Industries, D., M. Association of Hydraulic Equipment, et al. (1983). Computer aided design in high pressure hydraulic systems. London, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Manufacturing Technology and Design, G. (1989). Engineering design: proceedings of the Institution of Mechanical Engineers international conference. 1989, Harrogate. Bury St Edmunds, Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Materials, G. (1986). Size effects in fracture: papers presented at a seminar organized by the Materials Group of the Engineering Sciences Division of the Institution of Mechanical Engineers and held at RAF Farnborough on 10 November 1986. London, published by Mechanical Engineering Publications for The Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Materials, g. and G. Institution of Mechanical Engineers. Engineering in Medicine (1986). Applications of engineering ceramics: non ic engine applications: papers presented at a seminar held at the Institution of Mechanical Engineers, 26 February 1986. London, Published by Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Medical Engineering, S. and A. British Orthopaedic (1977). Joint replacement in the upper limb: [papers read at a] conference sponsored by the Medical Engineering Section of the Institution of Mechanical Engineers and the British Orthopaedic Association, London, 18-20 April 1977. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Medical Engineering, S. and a. british orthopaedic (1977). Joint replacement in the upper limb: [proceedings of a] conference sponsored by te Medical Engineering Section of the Institution of Mechanical Engineers, and the British Orthopaedic Association, London, 18-20 April, 1977. London, Mechanical Engineering Publ.
|
Institution of Mechanical Engineers. Medical Engineering, S. and A. British Orthopaedic (1977). Joint replacement in the upper limb: conference sponsored [i.e. organized] by the Medical Engineering Section of the Institution of Mechanical Engineers and the British Orthopaedic Association, London, 18-20 April 1977. London (etc.), Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Medical Engineering, S. and A. British Orthopaedic (1977). Joint replacement in the upper limb: conference sponsored by the Medical Engineering Section of the Institution of Mechanical Engineers and the British Orthopaedic Association, London, 18-20 April 1977. London, Mechanical Engineering Publications; for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Nuclear Energy, C. (1992). Seismic and environmental qualification of equipment: papers presented at a seminar organized by the Nuclear Energy Committee of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 7 October 1992. London, Mechanical Engineering Pubs for Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Nuclear Energy, C. (1993). The Inspection and structural validation of nuclear power generation plant: papers presented at at seminar organized by the Nuclear Energy Committee of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 25 November 1993. London, Published by Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Operators and Users, C. (1999). Improving vehicle workshop efficiency: incorporating automatic identification technology. Bury St Edmunds, Professional Engineering.
|
Institution of Mechanical Engineers. Power Industries, D. (1982). Centrifugal pumps - hydraulic designs: sponsored by the Power Industries Division of the Institution of Mechanical Engineers: 16 November, 1982, The Institution of Mechanical Engineers, London. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Power Industries, D. (1986). Radial loads and axial thrusts on centrifugal pumps: papers presented at a seminar held at the Institution of Mechanical Engineers on 5 February 1986. London, Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Power Industries, D. and A. Koninklijk Instituut van Ingenieurs. Division of Mechanical Engineering and Naval (1981). Fluid machinery for the oil, petrochemical and related industries: European Congress sponsored by The Power Industries Division of the Institution of Mechanical Engineers and The Division of Mechanical Engineering and Naval Architecture of The Royal Dutch Institution of Engineers, The Hague, 24-26 March 1981. Bury St Edmunds, Mechanical Engineering for The Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Power Industries, D. and D. Institution of Mechanical Engineers. Engineering Sciences (1984). Computational methods in turbomachinery. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Power Industries, D. and D. Institution of Mechanical Engineers. Railway (1982). The next generation of diesel engines for rail traction: [proceedings of a conference held on] 21 and 22 September 1982 [at the] University of York. [Bury St. Edmunds], Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Power Industries, D. and E. Institution of Electrical (1982). Direct digital control for power plant: 28th October 1982, The Institution of Mechanical Engineers, London. London, Published by Mechanical Engineering Publications Limited for The Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Power Industries, D. and G. Nihon Kikai (1985). Combustion engines - reduction of friction and wear: [papers read at the conference held at the Institution of Mechanical Engineers, London on 18-19 March 1985]. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering.
|
Institution of Mechanical Engineers. Power Industries, D., D. Institution of Mechanical Engineers. Process Industries, et al. (1985). Pipework design and operation: 19-20 February 1985, 1 Birdcage Walk, Westminster, London SW1. London, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
Institution of Mechanical Engineers. Power Industries, D., Inspec, et al. (1981). Developments in variable speed drives for fluid machinery: conference sponsored by the Power Industries Division of the Institution of Mechanical Engineers and the Institution of Electrical Engineers, 9 June 1981, Institution Headquarters, 1 Birdcage Walk, Westminster, London. London, Published by Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Institution of Mechanical Engineers. Power Industries, D., U. Harwell Laboratory. Energy Technology Support, et al. (1996). Energy saving in the design and operation of compressors. Bury St Edmunds, Mechanical Engineering Publications Limited for The Institution of Mechanical Engineers.
|
