Islam, M. V. and W. Wallace (1984). Carbon fibre reinforced aluminium matrix composites: a critical review. Ottawa, Division of Mechanical Engineering, National Research Council Canada.
|
Ismail Mostafa, M. A. (1989). Char burn-out and flame stability in a pulverized fuel furnace.
|
Isnardi, F. A. (1950). Il laboratorio tecnologico. Torino, Chiantore.
|
Issa, R. I. (1974). The prediction of supersonic boundary-layers with embedded pressure waves.
|
Italconsult, s. (1971). Análisis de complejos industriales. Madrid, [Publicaciones de la Escuela Nacional de Administración Pública].
|
Ivankovic, A. (1991). Rapid crack propagation in polymer multi-layer systems.
|
Iwan, W. D. and D. American Society of Mechanical Engineers. Applied Mechanics (1974). Applied mechanics in earthquake engineering: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, New York, New York, November 17-21, 1974. New York, American Society of Mechanical Engineers.
|
Iwan, W. D., N. Y. American Society of Mechanical Engineers. Winter Annual Meeting, et al. (1974). Applied mechanics in earthquake engineering: [symposium]. New York, American Society of Mechanical Engineers.
|
Iwanami, S. and N. Chikamori (1966). Pakkin gijutsu benran. Sangyo Tosho Pub., Co.
|
Izart, J. (1942). Construction mécanique. Paris, Dunod.
|
Izzuddin, B. A. (1991). Nonlinear dynamic analysis of framed structures.
|
Jackson of Burnley, W. J. B. and M. London. University. Imperial College of Science and Technology. Committee on Science of (1969). Science of materials: research report 1966-68, Departments of Chemical Engineering and Chemical Technology, Chemistry, Electrical Engineering, Mathematics, Mechanical Engineering, Metallurgy, Physics. [London, Imperial College of Science and Technology].
|
Jackson, A. (1971). Mechanical engineering science for 01. London, Longmans.
|
Jackson, A. (1971). Mechanical engineering science for O1. Harlow, Longman.
|
Jackson, C. (1979). The practical vibration primer. Houston, Gulf Pub. Co., Book Division.
|
Jackson, D. C. and W. P. Jones (1929). The profession of engineering: essays. New York; London, J. Wiley & Sons, inc.: Chapman & Hall, Limited.
|
Jackson, H. H. (1944). Engineering production annual. London, P. Elek (publishers) ltd.: v.
|
Jackson, J. O. (1972). Geotechnical properties of the Lower Oxford Clay related to deep burial.
|
Jacob, J. M. (1989). Industrial control electronics: applications and design. Englewood Cliffs (N.J.); London, Prentice-Hall International.
|
Jacobsen Lydik, S. and S. Ayre Robert (1958). Engineering Vibrations, with Applications to Structures and Machinery. [With bibliographies.]. New York, McGraw-Hill Book Co.
|
Jacobsen, L. S. and R. S. Ayre (1958). Engineering vibrations with applications to structures and machinery. New York; London, McGraw-Hill.
|
Jacobson, B. O. (1970). On the lubrication of heavily loaded spherical surfaces considering surface deformations and solidification of the lubricant. Stockholm, exp. (Ingeniörsvetenskapsakademien).
|
Jacobus, D. S. (1898). Experimental mechanics. [Hoboken, N.J.], Press of the Stevens indicator.
|
Jacucci, G., M. Ispra Course on Computer Simulation in Physical, et al. (1986). Computer simulation in physical metallurgy: lectures delivered at the Ispra Course held at Ispra, Italy, 21-25 May 1984. Dordrecht; Lancaster, Reidel.
|
Jafar-Pisheh, K. (1996). Chemical polishing and its importance to tribiology.
|
Jagomägi, I., I. Öpik, et al. (1994). Ilmar Öpik: personaalnimestik. Tallinn, Teaduste Akadeemia Kirjastus.
|
Jahanbaksh, A. (1986). Prediction of air flow in diesel combustion chambers: 276 leaves.
|
Jain, P. K. (1975). Process rates within slow sand filters.
|
Jalloq Monica, C. and W. College of Librarianship (1982). Use of patent literature by academics in chemistry and physics, electrical & mechanical engineering: final report for the periods July 1979-November 1980, June 1981-October 1982. Aberystwyth, College of Librarianship Wales.
|
Jalloq, M. C. (1982). Use of patent literature by academics in chemistry & physics, electrical & mechanical engineering: final report for the periods July 1979-November 1980, June 1981-October 1982. Aberystwyth, College of Librarianship Wales.
|
Jalloq, M. C., D. British Library. Research and Development, et al. (1982). Use of patent literature by academics in chemistry and physics, electrical and mechanical engineering: Volume 1. London, British Library Research and Development Department.
|
Jalloq, M. C., D. British Library. Research and Development, et al. (1982). Use of patent literature by academics in chemistry and physics, electrical and mechanical engineering. London, British Library Research and Development Department.
|
Jaluria, Y. (1998). Design and optimization of thermal systems. New York; London, McGraw-Hill.
|
James, M. L. (1989). Vibration of mechanical and structural systems: with microcomputer applications. New York; Cambridge, Harper & Row.
|
James, M., E. Great Britain Health and Safety, et al., Eds. (1996). Risk management in civil, mechanical and structural engineering, Thomas Telford.
|
James, M., E. Great Britain. Health and Safety, et al. (1996). Risk management in civil, mechanical and structural engineering: proceedings of the conference organized by the Health and Safety Executive in co-operation with the Institution of Civil Engineers and held in London on 22 February 1995. London, T. Telford.
|
James, S. (2003). An experimental study of disc brake squeal. Liverpool, Thesis Ph.D.
|
Jamieson, A. (1905). A text-book applied mechanics and mechanical engineering: specially arranged for the use of engineers qualifying for the institution of civil engineers the diplomas and degrees of technical colleges and universitaties advanced science certificates of British and Colonial boards of education and honours certificate of the City and Guilds of London Institute in mechanical engineering and engineers generally. London, Griffin and Co.
|
Jamieson, A. (1905). A text-book of applied mechanics and mechanical engineering. London, Griffin.
|
Jamieson, A. (1908). A Text-Book of Applied Mechanics and Mechanical Engineering. Sixth edition, revised, etc. London, Charles Griffin & Co.
|
