Kaemaki, S.-P. (1991). Modelling impacts of acid deposition and afforestation on catchment hydrochemistry.
|
Kafrissen, E. and M. Stephans (1984). Industrial robots and robotics. Reston, Reston Publishing Company.
|
Kaguchi, H. (1994). Prediction of high temperature crack growth.
|
Kaihara, T. (1994). Hierarchical manufacturing system modelling methodology based on object oriented programming paradigm.
|
Kaimai, T. (1984). Oiliness and extreme pressure additives: 274 leaves, 24 leaves of plates.
|
Kalaba, R. and K. Spingarn (1982). Control, identification, and input optimization. New York; London, Plenum Press.
|
Kalani, G. (1988). Microprocessor based distributed control systems. London, Prentice Hall International.
|
Ka-Lung, C. (1981). The permeability of clays under low hydraulic gradients: 158 leaves.
|
Kam, J. C.-P. (1989). Structural integrity of offshore tubular joints subject to fatigue.
|
Kamali, A. R. (1990). Traffic generation characteristics of off-centre, non-food, retail warehouse developments.
|
Kamhawi, K. Z. R. (1992). The shear strength of two resedimented clays at low and very low stress levels.
|
Kaminski, D. A. and D. General Electric Company. Corporate Research and (1977). Heat transfer and fluid flow data books. Schenectady, N.Y., General Electric Co.
|
Kamm, L. J. (1996). Understanding electro-mechanical engineering: an introduction to mechatronics. New York, Institute of Electrical and Electronics Engineers.
|
Kamphuis, J. W. (1968). Mathematical model study of the propagation of tides in the St. Lawrence River and estuary. [Ottawa, National Research Council of Canada.
|
Kane, T. R. and D. A. Levinson (1985). Dynamics: theory and applications. New York; London, McGraw-Hill.
|
Kaneshige, K., K. Izawa, et al. (1966). Proceedings [of the] IFAC Tokyo symposium on systems engineering for control system design, 1965. [s.l.], IFAC.
|
Kanjilal, P. P. and E. Institution of Electrical (1995). Adaptive prediction and predictive control. Stevenage, P. Peregrinus on behalf of Institution of Electrical Engineers.
|
Kannatey-Asibu, E., A. M. E. Division, et al., Eds. (1995). Manufacturing science and engineering 1995, ASME.
|
Kannatey-Asibu, E., American Society of Mechanical Engineers. Manufacturing Engineering Division., et al. (1995). Manufacturing science and engineering, 1995: presented at 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, American Society of Mechanical Engineers.
|
Kantartzi, C. (1994). Ground movements during diaphragm wall installation in clays.
|
Kapokakis, E. (1981). An automatic photogrammetric system based on the CP-1 plotter: 230 leaves.
|
Karami, G. (1984). A boundary integral equation method for two-dimensional elastic contact problems: 309 leaves.
|
Karassik, I. J. (1980). Centrifugal pump clinic. New York, M. Dekker.
|
Karavokyris, I. (1990). Modelling the dynamics of water in field soil-plant systems.
|
Kardomateas, G. A., V. Birman, et al. (2001). Contemporary research in engineering mechanics: presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York. New York, American Society of Mechanical Engineers.
|
Kardomateas, G. A., Y. Rajapakse, et al. (1994). Failure mechanics in advanced polymeric composites: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Karlebo Maskinaktiebolaget Stockholm. (1947). Teknisk ordlista: svensk, tysk, engelsk, rysk, över fackuttryck inom verktygs- och verktygsmaskinbranschen. Stockholm.
|
Karlebo Maskinaktiebolaget Stockholm. [from old catalog] (1963). Teknisk ordlista. [Stockholm.
|
Karlebo Maskinaktiebolaget Stockholm. [from old catalog] and T. Billman (1943). Teknisk ordlista, svensk, tysk, engelsk, fransk, över fackuttryck inom verktygs- och verktygsmaskinbranschen. [Stockholm.
|
Karlický, V. and Skoda (1999). Svet okrídleného sípu: koncern Skoda Plzen 1918- 1945. Plzen, Vydala Skoda ve spolupraci s nakladatelstvim Paseka.
|
Karmegam, M. (1981). Parameter identification in flood routing: 498 leaves + 1 microfiche.
|
Karni, S. (1971). Intermediate network analysis. Boston, Allyn and Bacon.
|
Karnopp, D. (2004). Vehicle stability. New York, Basel; Basel, Marcel Dekker.
|
Karwa, R., P. C. Agarwal, et al., Eds. (2003). Proceedings of the national seminar on advances in solar energy technologies, Allied.
|
Kashani, M. (1993). Local and overall buckling of spacedomes.
|
Kashani, R., A. D. S. a. C. Division, et al., Eds. (1994). Transportation systems: 4th Symposium: International Mechanical Engineering Congress: Papers. ASME -publications- DSC; vol 54, ASME.
|
Kashirin, A. i. I. (1953). Technologie des Maschinenbaus. [Übersetzung Hugo Siegel] Berlin, Verlag Technik.
|
Kasper, R. and Otto-von-Guericke-Universität Magdeburg. Institut für Maschinen- und Antriebstechnik. (1997). 3. Magdeburger Maschinenbau-Tage: Entwicklungsmethoden und Entwicklungsprozesse im Maschinenbau, 11. bis 13. September 1997. Berlin, Logos.
|
Kasvand, T., D. Isnor, et al. (1970). Man versus computer in the measurement of size distribution of nerve fibers. Ottawa, National Research Council of Canada.
|
Katholieke Universiteit Leuven Faculty of Applied Sciences Department of Mechanical Engineering Mechanical Construction and Production, D. (1989). Numerical methods in structural dynamics: Seminar: 14th International seminar on modal analysis: Papers, Katholieke Universiteit Leuven.
|
