Loy, A. v. and L. G. v. Loy (1945). Landbouwmechanica. Antwerpen, N. v. Standaard-boekhandel.
|
Ltd, B. P. P. D. (1986). Wytch Farm Development: Purbeck-Southampton Pipeline: environmental impact assessment. Wareham, BP Petroleum Development Ltd.
|
Lu, H.-B. (1991). Condensation of steam on a small tube bank in the presence of air.
|
Lu, P.-C. (1973). Introduction to the mechanics of viscous fluids. New York; London (etc.), Holt, Rinehart and Winston.
|
Lu, Q. and W. Mass (1999). Technology transfer and indigenous innovation in pre-Revolution China [article]: mechanical engineering capabilities and textile machinery enterprises.
|
Lubarda, V. A. (2002). Elastoplasticity theory. Boca Raton, CRC Press.
|
Lübcke, E. and L. Cremer (1940). Noise abatement in architectural and mechanical engineering. Berlin, J. Springer.
|
Lucas, M. and M. International Conference on Advances in Experimental (2004). Advances in experimental mechanics: proceedings of the International Conference on Advances in Experimental Mechanics, 6th-8th September 2004, Novotel Hotel, York. Switzerland, Trans Tech.
|
Lucena Filho, A. P. d. (1986). Exact solution approaches for the vehicle routing problem.
|
Lucena Neto, E. (1992). Localized post-buckling solutions in long axially-compressed cylindrical shells.
|
Lucke, C. E. (1950). Mechanical engineering in Columbia University; its first fifty years as a department in the University. [New York? Dept. of Mechanical Engineering.
|
Lucke, C. E. and Columbia university. Dept. of mechanical engineering. (1916). Specifications for mechanical engineering, 101-102, power machinery. New York.
|
Luddington, D., A. Valbonesi, et al. (1981). Design in technical studies. G.B., Blackie.
|
Ludema, K. C., M. International Conference on Wear of, et al. (1987). Wear of materials 1987: presented at the International Conference on Wear of Materials, Houston, Texas, April 5-9, 1987.
|
Lüdicke, A. (1918). Mechanische technologie. Berlin und Leipzig, G. J. Göschen.
|
Ludwig, O. (1951). Technische Tabellen; ein berufskundliches Hilfsbuch für Maschinenbau. Giessen, Pfannenberg.
|
Ludwig, O. and O. Ludwig (1943). Formeln und zahlentafeln zu Ludwig. Nordhausen, H. Killinger.
|
Lueptow Richard, M., L. Keith William, et al., Eds. (1995). Flow noise modeling, measurement, and control 1995: Symposium: International mechanical engineering congress: Papers. ASME -publications- NCA; vol 19, ASME.
|
Lui, C. W.-K. (1983). The use of computer-aided techniques for hypoid gear design: 229 leaves.
|
Lukin, J. (1901). The boy engineers. New York, London, G. P. Putnam's sons.
|
Lumbers, J. P. (1988). Rotating biological contractors: mechanisms, modelling and design.
|
Lumkes John, H. (2002). Control strategies for dynamic systems: design and implementation. New York, Marcel Dekker.
|
Lundholm, G. (1969). The circumferential groove journal bearing considering cavitation and dynamic stability. Stockholm, exp. (Ingeniörsvetenskapsakad.).
|
Lunn, T. S. (1983). Flow-induced instabilities of fluid-conveying pipes: 213 leaves, 2 leaves of plates.
|
Luong, T.-V. (1983). Halogenated organic materials in water supplies: 284 leaves.
|
Lupini, J. F. (1981). The residual strength of soils: 474 leaves, 15 leaves of plates.
|
Lute, P. J. (1990). Control of passive indoor climate systems with adjustabl shutters, shading devices and vent windows. Delft, Delft University of Tech.
|
Lutz, O. (1966). Prof. Dr.-Ing. Otto Lutz zum 60. Geburtstag, 8. April 1966. ([Mainz, Krauskopf].
|
Lymberopoulos, N. (1987). Flow in single and twin-entry radial turbocharger turbine volutes: 176 leaves.
|
Lynch, M. A. (2001). Limit loads of piping branch junctions with cracks. Liverpool, Thesis Ph.D.
|
Lynwander, P. (1983). Gear drive systems: design and application. New York, M. Dekker.
|
Lyon, R. H. (1987). Machinery noise and diagnostics. Boston, [Mass.]; London, Butterworths.
|
Lyon, R. H. (2000). Designing for product sound quality. New York, Marcel Dekker.
|
Lyons, G. J. (1986). On the hydrodynamics of tensioned slender flexible cylinders: 252 leaves, [7] leaves of plates.
|
Lyons, L. P. R. (1977). A general finite element system: with special reference to the analysis of cellular structures.
|
Maali, F. (1984). Image processing and pattern recognition for industrial robotic vision: 234 leaves.
|
Maccallum, H. (1908). Fundamental Rules & Formulæ used in Mechanical and Electrical Engineering. Chelmsford, "Essex County Chronicle".
|
Maccallum, H. (1908). Fundamental rules and formulae used in mechanical and electrical engineering, Chelmsford.
|
Maccarini, M. (1987). Laboratory studies of a weakly bonded artificial soil: 345 leaves.
|
MacCord, C. W. (1883). Kinematics: a treatise on the modification of motion, as affected by the forms and modes of connection of the moving parts of machines. Fully illustrated by accurate diagrams of mechanical movements, as practically constructed; for the use of draughtsmen, machinists, and students of mechanical engineering. New York, John Wiley & Sons.
|
