Main, J., A. A. Division, et al., Eds. (2001). Adaptive structures and material systems -2001, ASME.
|
Main, J., J. A. Shaw, et al. (2001). Adaptive structures and material systems--2001: presented at the 2001 ASME International Mechanical Engineering Congress and Exposition: November 11-16, 2001, New York, New York. New York, New York, American Society of Mechanical Engineers.
|
Mair, G. M. (1988). Industrial robotics. London, Prentice-Hall.
|
Maisel, B. I. (1970). Scale effects in investigations for the optimisation of reinforcement in reinforced concrete slabs.
|
Maitra, G. M. and L. V. Prasad (1985). Handbook of mechanical design. New Delhi; [London], Tata McGraw-Hill.
|
Majlesi, Y. (1995). A laboratory investigation into the structural performance and mechanical properties of plain and reinforced concrete elements affected by alkali silica reaction.
|
Major, A. (1980). Dynamics in civil engineering: analysis and design. Budapest; London, Akademiai Kiado: Collet's.
|
Majumdar, B. C. and E. Indian Institute of Technology Department of Mechanical, Eds. (1993). Design of mechanical systems: 3rd National conference: Papers, The Institute.
|
Mak, C.-M. (1996). The application of computational fluid dynamics to the prediction of regenerated noise in ventilation systems.
|
Makarov, K. I. (1945). Detali mashin.
|
Makartchouk, A. (2002). Diesel engine engineering: thermodynamics, dynamics, design, and control. New York, Marcel Dekker.
|
Makartchouk, A. (2002). Diesel engine engineering: thrmodynamics, dynamics, design, and control. New York, Marcel Dekker.
|
Makomaski, A. H. (1967). Normal reflection of a plane gaseous detonation wave in a tube. Ottawa, National Research Council of Canada.
|
Makomaski, A. H. (1968). Exploratory study of the initiation of low-density PETN by hydrogen-oxygen detonation waves. [Ottawa, National Research Council of Canada.
|
Malalasekera, W. M. G. (1989). Mathematical modelling of fires and related processes.
|
Malavasi, C. (1949). Vademecum per l'ingegnere costruttore meccanico. Milano, Hoepli.
|
Malcolm, D. R. (1988). Robotics: an introduction. Boston, Mass., PWS-KENT Pub. Co.
|
Maleev, V. L. and J. B. Hartman (1954). Machine design. Scranton, International Textbook Co.
|
Malek, M. A. (2005). Power boiler design, inspection, and repair: ASME code simplified. New York, McGraw-Hill.
|
Malekpour, R. (1983). Energy dissipation in concrete in compression under quasi- static and rapid repeated loading: 335 leaves.
|
Malin, M. R. (1987). Turbulence modelling for flow and heat transfer in jets, wakes and plumes.
|
Malkin, S. (1989). Grinding technology: theory and applications of machining with abrasives. Chichester; New York, Ellis Horwood: Halsted.
|
Mallick, P. K. (1993). Fiber-reinforced composites: materials, manufacturing, and design. New York, M. Dekker.
|
Mallows, D. F. and W. J. Pickering (1972). Stress analysis problems in S.I. units. Oxford; New York, Pergamon Press.
|
Malstrom, E. M., I. W. Pence, et al. (1994). The Materials Handling Engineering Division 75th anniversary commemorative volume: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Maltbaek, J. C. (1988). Dynamics in engineering: classical yet modern, general yet comprehensive, original in approach. Chichester, Ellis Horwood.
|
Malyeev Vladimir, L. (1939). Machine Design. Scranton, International Textbook Co.
|
Managing computer aided, d. and D. Institution of Mechanical Engineers. Process Industries (1980). Managing computer aided design: conference sponsored by the Process Industries Division of the Institution of Mechanical Engineers, 19 November 1980, Institution Headquarters, 1 Birdcage Walk, Westminster, London. London, Mechanical Engineering for the Institution.
|
Manchester (1928). [Prospectuses of courses.], Manchester.
|
Manchester and Manchester (1947). [Prospectuses of university courses at the Municipal College of Technology, Manchester. Session 1947/48, etc.], Manchester.
|
Mancuso, J. R. (1999). Couplings and joints: design, selection, and application. New York, Marcel Dekker.
|
Mandal, S. (1992). On the identification and parametric modelling of offshore dynamic systems.
|
Mandalidis, D. G. (2001). Methodological considerations in the assessment of shoulder function. Dublin, Trinity College.
|
Mandey, V. and J. Moxon (1696). Mechanick-powers: or, The mistery of nature and art unvail'd: Shewing what great things may be perform'd by mechanick engines, in removing and raising bodies of vast weights with little strength, force; and also the making of machines, or engines, for raising of water, draining of grounds, and several other uses. Together with a treatise of circular motion artificially fitted to mechanick use, and the making of clock-work, and other engins. A work pleasant and profitalbe for all sorts of men, from the hightst to the lowest degree: and never treated of in English but once before, and that but briefly. The whole comprised in ten books, and illustrated with copper cuts. London, Printed for the authors, and sold by Ven. Mandey, next door to the Salmon in Bloomsbery Market, and James Moxon at the Atlas in Warwick-Lane.
|
Mandey, V. and J. Moxon (1709). Mechanic powers, or, The mystery of nature and art unvail'd. together with a treatise of circular motion artificially fitted to mechanic use, and the making of clock-work, and other engines.; the whole comprized in ten books, and illustrated with copper cuts. London, Printed for Tho. Shelmerdine.
|
Mandey, V. and J. Moxon (1709). Mechanick powers; or, The mystery of nature and art unvail'd. Together, with a treatise of circular motion artificially fitted to mechanick use, and the making of clock-work, and other engines. The whole comprized in ten books, and illustrated with copper cuts. London, Printed for T. Shelmerdine.
|
Mandey, V., J. Moxon, et al. (1702). Mechanick powers. London, Printed for T. Shelmerdine and T. Ballard.
|
Mandl, P., G. Givens, et al. (1964). Dynamics of high-velocity penetration into clay. Ottawa, National Research Council of Canada.
|
Manglik Raj, M., A. H. T. Division, et al., Eds. (2000). Advances in enhanced heat transfer 2000. ASME -publications- PID; vol 4, ASME.
|
Manglik, R. M., American Society of Mechanical Engineers. Heat Transfer Division., et al. (2000). Advances in enhanced heat transfer, 2000: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y., American Society of Mechanical Engineers.
|
