Niu, X. (1987). Effect of local stresses on strength of tubular welded joints: 346 leaves, [2] leaves of plates.
|
Nizam (1992). Numerical modelling of 3D wave-induced nearshore currents.
|
N-Nagy, F. and A. Siegler (1987). Engineering foundations of robotics. Englewood Cliffs, N.J.; London, Prentice-Hall International.
|
Noble John, H., W. Smith, et al. (1876). The Progress of Civil and Mechanical Engineering and Shipbuilding illustrated. Edited by W. Smith, J. H. Noble, T. Smith aided. by numerous eminent engineers, etc, London, Dublin [printed].
|
Noise, S. a. V. C., E. Monash University Department of Mechanical, et al. (1974). Proceedings of Noise, Shock and Vibration Conference held during May 22-25, 1974, at Monash University, Melbourne; sponsored by Monash University, Department of Mechanical Engineering, Australian Acoustical Society, Victoria Division [and] the Institution of Engineers, Australia (the National Committee on Applied Mechanics). Clayton, Conference Organising Committee.
|
Nokhasteh, M. A. (1994). Corrosion damaged reinforced concrete beams with debonded tensile span reinforcement.
|
Noor Ahmed, K., A. A. Division, et al., Eds. (1994). Buckling and postbuckling of composite structures: Symposium: International mechanical engineering congress: Papers. ASME -publications- AD; vol 41, ASME.
|
Noor Ahmed, K., A. Needleman, et al., Eds. (1994). Computational material modeling: Symposium: International mechanical engineering congress: Papers. ASME -publications- AD; vol 42, ASME.
|
Noor Ahmed, K., L. Reifsnider Kenneth, et al., Eds. (1994). Durability and damage tolerance: Symposium: International mechanical engineering congress: Papers, ASME.
|
Noor, A. K., A. Needleman, et al. (1994). Computational material modeling: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y., American Society of Mechanical Engineers.
|
Noor, A. K., American Society of Mechanical Engineers. Aerospace Division., et al. (1994). Buckling and postbuckling of composite structures: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y., American Society of Mechanical Engineers.
|
Noor, A. K., K. L. Reifsnider, et al. (1994). Durability and damage tolerance: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y., American Society of Mechanical Engineers.
|
Norbye, J. P. (2001). Olds [article]: the engineering factor: Oldsmobile's longevity can be traced back to its mechanical innovations.
|
Nordhagen, E. (1968). Beregningsoppgaver i maskindeler. [Oslo], Universitetsforlaget.
|
Norman, C. A. and Hemstead Charles Addison. (1934). High-speed belt drives, a theoretical and experimental investigation of the performance of modern rubberized belts; a research in the Department of Mechanical Engineering. Columbus, College of Engineering, the Ohio State University.
|
Norman, C. A., G. N. Moffat, et al. (1945). Endurance strength. Columbus, Ohio, Mechanical engineering dept., the Ohio state university.
|
Northcroft, L. G. and W. M. Barber (1968). Steam trapping and air venting. London, Hutchinson.
|
Northern Ireland Economic Research Centre. Priority Skills, U. (2002). A study of the Northern Ireland labour market for mechanical engineering skills: a summary of the key findings. Belfast, Northern Ireland Economic Research Centre, Priority Skills Unit.
|
Northern Ireland. Ministry of, E. (1949). Arrangements and conditions for the award of National Certificates in mechanical engineering, to students in institutions of further education in Northern Ireland (1949 revision). Belfast, Her Majesty's Stationery Office.
|
Northrop, R. M. (1985). Glossary of French mechanical engineering terms. Peoria, Ill., R.M. Northrop.
|
Northrop, R. M. (1985). Glossary of German mechanical-engineering terms. Peoria, Ill., R.M. Northrop.
|
Norton, M. P. (1989). Fundamentals of noise and vibration analysis for engineers. Cambridge, Cambridge University Press.
|
Norton, R. L. (1992). Design of machinery: an introduction to the synthesis and analysis of mechanisms and machines. New York; London, McGraw-Hill.
|
Norton, R. L. (1999). Design of machinery: an introduction to the synthesis and analysi of mechanisms and machines. Boston, WCB McGraw-Hill.
|
Norwell, A. (1908). Drawing Book for Marine Engineers: a manual of mechanical drawing for sea-going engineers and apprentices in marine engineering technical classes. Glasgow, James Brown & Son.
|
Nottingham (1954). General and Mechanical Engineering. (A complete catalogue of the books stocked by Nottingham Public Libraries on mechanical engineering and its allied subjects.), [Nottingham].
|
Nourallah, N. (1978). The feasability of using Timber as a replacement element to steel in mechanical engineering, Final Year Projects, Department of Mechanical Engineering, University of Liverpool.
|
Nouri, J. M. (1988). Single and two-phase flows in ducts and stirred reactors.
|
Nurick, A. and M. A. Fonternel (1990). Commissioning of a helicopter tail boom circulation control test rig. Johannesburg, University of the Witwatersrand, School of Mechanical Engineering.
|
Nurick, A., S. Meyer, et al. (1989). A data acquisition unit for recording helicopter rotor on-board measurements. Johannesburg, South Africa, University of the Witwatersrand, Johannesburg, School of Mechanical Engineering.
|
Nuwayhid, R. Y. (1989). Assessment of thermal and fast reactor designs based upon the advanced gas-cooled reactor.
|
Nwabuzor, S. S. (1984). Soil water dynamics under field crops: 255 leaves + 2 microfiches.
|
Nwokah, O. D. I. and Y. Hurmuzlu (2002). The Mechanical systems design handbook: modeling, measurement, and control. Boca Raton, Fla.; London, CRC Press.
|
Nyaoro, D. L. (1989). Analysis of soil structure interaction by finite elements.
|
Nystrom, J. W. (1885). Pocket-book of mechanics and engineering. Philadelphia, London, J. B. Lippincott company.
|
Nystrom, J. W., W. D. Marks, et al. (1895). Nystrom's pocket-book of mechanics and engineering. Philadelphia, J. B. Lippincott company.
|
Obeng, L. A. (1981). Detergent builders in the activated sludge process: 205 leaves, 3 leaves of plates.
|
Oberg, E. (1914). Handbook for machine shop and drafting-room; a reference book on machine design and shop practice for the mechanical engineer, draftsman, toolmaker, and machinist. New York, Industrial Press.
|
Oberg, E. (1924). Draftsman's mathematical manual. New York, The Industrial press; [etc.
|
Oberg, E. and C. J. McCauley (2000). Machinery's handbook: a reference book for the mechanical engineer, designer, manufacturing engineer, draftsman, toolmaker, and machinist. New York, Industrial Press, Inc.
|
