Prony, J. C. F. d. and P. Ecole Impériale (1810). Leçons de méchanique analytique: données a l'École Impériale Polytechnique. A Paris, De l'imprimerie de l'Ecole Imperiale des Ponts et Chaussees.: De l'imprimerie de l'Ecole Royale des Ponts et Chaussees.
|
Property Advisers to the Civil Estate. Central Advice, U. (1998). GC/works/3 (1998): [contract for mechanical & electrical engineering works]: model forms & commentary. London, Stationery Office.
|
Property Advisers to the Civil Estate. Central Advice, U. (1998). GC/Works/4 (1998): general conditions. London, The Stationery Office.
|
Property Advisers to the Civil Estate. Central Advice, U. (1998). GC/WORKS/4 (1998). London, Stationery Office.
|
Property Advisers to the Civil Estate. Central Advice, U. (1998). GC/works/4 model forms & commentary (1998): [contract for building, civil engineering, mechanical & electrical small works]. London, Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/3 (1998) general conditions: [contract for mechanical & electyrical engineering works]. London, Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/3 (1998): [contract for mechanical and electrical engineering works]: general conditions. London, Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/3 (1998): [contract for mechanical and electrical engineering works]: model forms and commentary. London, Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/3 (1998): general conditions. London, The Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/4 (1998) general conditions: [contract for building, civil engineering, mechanical & electrical small works]. London, Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/4 (1998) model forms and commentary: [contract for building, civil engineering, mechanical & electrical small works]. London, Stationery Office.
|
Property Advisers to the Civil, E. (1998). GC/Works/4 (1998): [contract for building, civil engineering, mechanical & electrical small works]: general conditions. London, Stationery Office.
|
Property Services Agency. Directorate of Mechanical and Electrical Engineering, S. (1984). Mechanical and electrical engineering guide. [London], PSA, Directorate of M and E Engineering Services.
|
Property Services Agency. Directorate of Mechanical and Electrical Engineering, S. (1985). Mechanical ventilation for buildings. London, H.M.S.O.
|
Property Services Agency. Directorate of Mechanical and Electrical Engineering, S. (1987). Guidance notes for users of Standard specification (M & E) no.3 (1986). London, H.M.S.O.
|
Property Services, A. (1983). General conditions of government contracts for building, civil engineering, mechanical and electrical small works, Dec. 1982. London, HMSO.
|
Property Services, A. (1985). General conditions of government contracts for building, civil engineering, mechanical and electrical small works: C1001. London, H.M.S.O.
|
Property Services, A. (1985). General conditions of government contracts for building, civil engineering, mechanical and electrical small works. London, HMSO.
|
Proshko, S. G. (1982). Valentin Nikitich Poturaev. Kiev, "Nauk. dumka.
|
Pryer Robert William, J. (1934). Introduction to Engineering. A preliminary text-book on the practice of mechanical and aeronautical engineering. London, Sir I. Pitman & Sons.
|
Pryer, R. W. J. (1946). Introduction to engineering: a preliminary textbook on the practice of mechanical and aeronautical engineering. London, I. Pitman.
|
Publication, S. (1982). Dynamic vibration isolation and absorption: this conference and mini-exhibition was sponsored by Chartered Mechanical Engineer (a publication of the Institution of Mechanical Engineers) and organised by Publication Services, Worthing BN13 3AD: 8 September 1982, University of Southampton. Worthing, Mechanical Engineering Publications for Publication Services.
|
Publication, S. (1983). Efficiency in the design office: this conference was sponsored by the Institution of Engineering Designers, Chartered Mechanical Engineer and Drawing Paper and organised by Publication Services, Worthing BN1 3AD, 15-16 June, 1983, Wembley Conference Centre. Worther, Mechanical Engineering Publications for Publication Services.
|
Publication, S. (1983). Efficiency in the design office: this conference was sponsored by the Institution of Engineering Designers, Chartered Mechanical Engineer and Drawing Paper and organised by Publication Services.15-16 June, 1983, Wembley Conference Centre. Worthing, Mechanical Engineering Publications for Publication Services.
|
Pugh, B. (1980). The hydraulic age: public power supplies before electricity. London, Mechanical Engineering Publications.
|
Pugh, H. J. (1995). Deposition and adhesion of cryptosporidium oocysts on surfaces.
|
Pugh, H. L. D., E. International Conference on High Pressure, et al. (1977). High pressure engineering: [proceedings of] the second international conference. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Pugh, H. L. D., E. International Conference on High Pressure, et al. (1977). High pressure engineering: the second International Conference sponsored by the Institution of Mechanical Engineers. [and other bodies] University of Sussex, Brighton, 8-10 July 1975. London, Mechanical Engineering Publications for The Institution.
|
Pugh, H. L. D., N. A. I. C. o. H. Extrusion, et al. (1974). Hydrostatic extrusion: papers presented at the NEL/AIRAPT International Conference on Hydrostatic Extrusion, University of Stirling, 1973, organized by the National Engineering Laboratory, East Kilbride, Glasgow, Scotland. London, Mechanical Engineering Publications for the Institution of Mechanical Engineers.
|
Pull Douglas, J. (1962). Mechanical Engineering in a Modern Oil Refinery, [London].
|
Pullarcot, S. (2002). Practical guide to pressure vessel manufacturing. New York, Marcel Dekker.
|
Pullen, K. R. (1991). Design and development of a small gas turbine and high speed generator.
|
Pullin, J. (1997). Progress through mechanical engineering: the first 150 years of the Institution of Mechanical Engineers. London, Quiller Press.
|
Pumphrey, S. G. (1982). Bore polishing in a running diesel engine: 276 leaves, 31 leaves of plates.
|
Punwani Swamidas, K. and E. American Society of Mechanical, Eds. (2000). Rail transportation 2000, American Society of Mechanical Engineers.
|
Punwani, S. K. and American Society of Mechanical Engineers. (2003). Transportation 2003: Making tracks for tomorrow's transportation: presented at the 2003 ASME International Mechanical Engineering Congress: November 15-21, 2003, Washington, D.C. New York, N.Y., ASME.
|
Punwani, S. K. and American Society of Mechanical Engineers. Rail Transportation Division. (2000). Rail transportation--2000: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, American Society of Mechanical Engineers.
|
Punwani, S. K. and American Society of Mechanical Engineers. Rail Transportation Division. (2001). Rail transportation--2001: presented at the 2001 ASME International Mechanical Engineering Congress and Exposition: November 11-16, 2001, New York, New York. New York, New York, American Society of Mechanical Engineers.
|
Punwani, S. K. and E. American Society of Mechanical, Eds. (2002). Transportation: making tracks for tomorrow's transportation.
|
Purdue University School of Mechanical, E. (1990). Compressor engineering: 10th International conference: Papers, [np].
|
