Reddy, J. N. (1993). An introduction to the finite element method. New York; London, McGraw-Hill.
|
Redford George, D. (1973). Mechanical engineering design. 2nd ed., revised in S1 units. London, Macmillan.
|
Redford, G. D. (1966). Mechanical engineering design: an introduction. London, Macmillan.
|
Redford, G. D., J. G. Rimmer, et al. (1971). Mechanical technology: a two year course. London, Macmillan.
|
Redford. John, A. (2005). Separated flow transition. Liverpool, Thesis Ph.D.
|
Rediniotis, O. K. and American Society of Mechanical Engineers. Fluids Engineering Division. (1996). Proceedings of the ASME Fluids Engineering Division: presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia. New York, American Society of Mechanical Engineers.
|
Redman-White, W. (1983). The measurement of structural wave intensity, Original typescript.
|
Redmayne, S. R. A. S. (1920). Modern practice in mining. London, Longmans, Green.
|
Redmond, J., J. Main, et al. (2000). Adaptive structures and material systems--2000: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition: November 5-10, 2000, Orlando, Florida. New York, New York, American Society of Mechanical Engineers.
|
Redmond, J., J. Main, et al., Eds. (2000). Adaptive structures and material systems, ASME.
|
Reed, R. J. (1978). North American combustion handbook: a basic reference on the art and science of industrial heating with gaseous and liquid fuels. Cleveland, North American Mfg. Co.
|
Rees, D. W. A., C. Irish Durability and Fracture, et al. (1984). Environmental problems in materials durability: papers presented in March 1983 at a two-day meeting. held within the Department of Mechanical and Manufacturing Engineering, Trinity College, Dublin, Ireland. Dublin, Parsons Press.
|
Rees, D. W. A., C. Irish Durability and Fracture, et al. (1984). Environmental problems in materials durability: proceedings of the First Irish Durability and Fracture Conference, March 1983, held within the Department of Mechanical and Manufacturing Engineering, Trinity College, Dublin and organised by the Irish Du. Dublin, Parsons Press.
|
Reeve, J. (1995). Cams for industry: a handbook for designers of special-purpose machines. London, Mechanical Engineering Publications Ltd.
|
Reger, G., H. Kungl, et al. (1994). Research and technology management in enterprises: issues for community policy, Commission of the European Communities.
|
Regional Engineering College, S. K. D. o. M. E. and T. Indian Society for Heat and Mass (1989). Heat and mass transfer: 10th National conference: Papers. New Delhi, Prints.
|
Regnier, E. (1799). Mémoires explicatifs du dynamomètre et autres machines inventées. A Paris, Impr. de la republique.
|
Regnier, E. and I. London (1798). Mémoires explicatifs du dynamomètre et autres machines inventées par le Cen. Regnier: garde du dépôt des modèles et archives de l'Artillerie, à Paris. Paris, Impr. de la Republique.
|
Rehg, J. A. (1985). Introduction to robotics: a systems approach. Englewood Cliffs; London, Prentice-Hall.
|
Reid John, D., A. A. M. Division, et al., Eds. (1995). Crashworthiness and occupant protection in transportation systems 1995: 4th Symposium: International mechanical engineering congress: Papers. ASME Pub BED; vol 30, ASME.
|
Reid, D. (2001). An introduction to engineering mechanics. Basingstoke, Palgrave.
|
Reid, J. D., American Society of Mechanical Engineers. Applied Mechanics Division., et al. (1995). Crashworthiness and occupant protection in transportation systems, 1995: presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, N.Y., American Society of Mechanical Engineers.
|
Reid, J. S. (1990). Mechanical Aberdeen: an engineering view of Aberdeen's industries from 1888-1913, the first 25 years of the Aberdeen Mechanical Society. Aberdeen, KMP/JSR.
|
Reis, L. A. d. Q. L. (1985). Experimental and numerical investigation of the flow over a deflected flap: 187 leaves.
|
Reisman, A. (1971). Managerial and engineering economics. Boston, Allyn and Bacon.
|
Rejal, M. A. (1984). Solutions of the heat-conduction equation with phase change and moving boundaries: 205 leaves.
|
Reksoprodjo, A. H. S. (1994). Computer based geometric modelling for dimensional inspection of engineering components.
|
Remington, A. A. and C. Steel Research (1920). Report of the Steel Research Committee: founded by the Institution of Automobile Engineers and the Society of Motor Manufacturers and Traders on an investigation conducted to establish the mechanical properties of the British wrought automobile steels, British Engineering Standards Association, Report No. 75, and the factors governing testing procedure in connection therewith, October, 1920. Sheffield, Northend.
|
Remzi, E. M. (1981). Boundary integral equation stress analysis of incompressible and nearly incompressible materials: 300 leaves.
|
Ren, Y. (1992). The analysis and identification of friction joint parameters in the dynamic response of structures.
|
Renton, J. D. (1987). Applied elasticity: matrix and tensor analysis of elastic continua. Chichester, Ellis Horwood.
|
Renwick, J. (1840). Applications of the science of mechanics to practical purposes. New York, Harper & Brothers.
|
Résal, H. (1881). Traité de mécanique générale: comprenant les leçons professées à l'École polytechnique. Paris, Gauthier-Villars.
|
Résal, H. A. (1895). Traité de mecanique générale: comprenant les leçons professées a l'Ecole polytechnique. Paris, Gauthier-Villars.
|
Résal, H. and p. Ecole (1873). Traité de mécanique générale: comprenant les leçons professées á l'École polytechnique. Paris, Gauthier-Villars, Imprimeur-Libraire.
|
Research Project Seminar on Quiet Oil Hydraulic, S., G. Institution of Mechanical Engineers. Fluid Power Transmission, et al. (1977). Research Project Seminar on Quiet Oil Hydraulic Systems: a progress report on research sponsored jointly by the Department of Industry Mechanical Engineering and Machine Tool Requirements Board and by industry. London, Mechanical Engineering Publs.
|
Research Symposium of Postgraduate, R. and E. University of Birmingham. School of Manufacturing and Mechanical (1998). Proceedings of the. annual Research Symposium of Postgraduate Research. Birmingham, School of Manufacturing & Mechanical Engineering, University of Birmingham.
|
Reshetov, D. i. N. (1964). Laboratornye raboty po kursu "Detali mashin.".
|
Reshetov, D. N., V. T. Portman, et al. (1988). Accuracy of machine tools. New York, ASME Press.
|
Reti, L. (1965). Tracce dei progetti perduti di Filippo Brunelleschi nel Codice atlantico di Leonardo da Vinci. [Firenze], G. Barbèra.
|
