Roose, R. W. and T. R. Roose (1984). Handbook of data sheets for solution of mechanical systems problems. New York, Van Nostrand Reinhold.
|
Roozenburg, N. F. M., D. Royal Institution of Engineers in the Netherlands Department for Mechanical Engineering, et al., Eds. (1993). ICED 93: 9th International conference on engineering design: Papers and summaries, Heurista.
|
Roper, S. (1881). The engineer's handy-book. Containing a full explanation of the steam-engine indicator. Philadelphia, E. Claxton & company.
|
Roper, S. (1881). The engineer's handy-book. Philadelphia, E. Claxton & company.
|
Roper, S., E. R. Keller, et al. (1899). Engineers' handy-book. Containing facts, formulæ, tables and questions on power, its generation, transmission, and measurement, together with a discussion of the fundamental experiments in electricity. Philadelphia, D. McKay.
|
Roriz, L. F. C. (1982). Heat and mass transfer in porous building materials: 220 leaves, 3 leaves of plates.
|
Rorke, J. (1959). Longitudinal vibration of marine propeller shafting.
|
Rose, I. G. and A. Malaysian Rubber Producers' Research (1982). Vibration isolation with natural rubber. [Brickendonbury], Malaysian Rubber Producers' Research Association.
|
Rosen, M. A., J. G. Kawall, et al., Eds. (1998). CSME forum 1998 = Forum SCGM 1998. Toronto, Ryerson Polytechnic University.
|
Rosenberg, E. (1903). Electrical engineering: An elementary text-book suitable for persons employed in the mechanical and electrical trades for elementary students of electrical engineering, and for all who wish to acquire a knowledge of the chief principles and practice of the subject. London, Harper and Brothers.
|
Rosenberg, R. C. and D. Karnopp (1983). Introduction to physical system dynamics. New York; London, McGraw-Hill.
|
Rosheim, M. E. (1989). Robot wrist actuators. New York (N.Y.); Chichester, Wiley.
|
Ross John, P. (1922). Mechanical Engineering Detail Tables, etc. London, 1923, Sir I. Pitman & Sons.
|
Ross, C. T. F. (1984). Finite element programs for axisymmetric problems in engineering. Chichester, Ellis Horwood.
|
Ross, C. T. F. (1985). Finite element methods in structural mechanics. Chichester, West Sussex, England; New York, E. Horwood: Halsted Press.
|
Ross, C. T. F. (1987). Advanced applied stress analysis. Chichester; New York, E. Horwood: Halsted Press.
|
Ross, C. T. F. (1987). Applied stress analysis. Chichester, Ellis Horwood.
|
Ross, C. T. F. (1990). Finite element methods in engineering science. Chichester, Ellis Horwood.
|
Ross, C. T. F. (1997). Dynamics of mechanical systems. Chichester, Horwood Pub.
|
Ross, J. P. (1923). Mechanical engineering detail tables: a compilation based on many years experience and intended for the use of designers, draughtsmen and works managers. London, Pitman.
|
Ross, J. P. (1923). Mechanical engineering detail tables. London, New York [etc.], Sir I. Pitman & sons, ltd.
|
Rossin, A. C. (1981). Influence of detergent builders on heavy metals in waste water treatment: 257 leaves, 11 leaves of plates.
|
Roth, A. (1982). Vacuum technology. Amsterdam; Oxford, North-Holland/Elsevier.
|
Rothbart, H. A. and T. G. Hicks (1988). Mechanical engineering essentials reference guide. New York; London, McGraw-Hill Bk. Co.
|
Rouzegari, N. (1993). Dynamic response of arch dams.
|
Rowe, R. P. (1984). The performance of harbour breakwaters in South East England: 206 leaves.
|
Rowlinson, S. and B. Chartered Institute of (1987). Design build: its development and present status. Ascot, Chartered Institute of Building.
|
Roy, K. P. and S. K. H. Choudhury (1964). Elements of mechanical engineering. Bombay; London, Asia Publishing House.
|
Roy, K. R. D. and D. Andhra University College of Engineering Department of Mechanical Engineering Industrial Engineering (1993). Ergonomics: retrospective and prospective: National workshop: Papers, Industrial Engineering Division, Department of Mechanical Engineering, College of Engineering, Andhra University.
|
Royal College of Science and Technology, G. D. o. M. C. a. C. E. and s. G. Symposium on Nuclear Reactor Containment Buildings and Pressure Vessels (1960). Nuclear reactor containment buldings and pressure vessels: proceedings of a symposium organized by the Department of Mechanical, Civil and Chemical Engineering of the Royal College of Science and Technology, Glasgow, 17th to 20th May, 1960. London, Butterworths.
|
Royal College of Science and Technology. Department of Mechanical, C. a. C. E. (1960). Nuclear reactor containment buildings and pressure vessels: proceedings of a symposium organized by the Department of Mechanical, Civil and Chemical Engineering of the Royal College of Science and Technology, Glasgow, 17th to 20th May, 1960, Butterworths.
|
Royal Institution of Chartered, S. (1968). Cost planning mechanical and electrical engineering serv in connection with building projects, Rics.
|
Royal Scottish Society of Arts., C. G. Darwin, et al. (1934). This modern world and the engineer. Edinburgh, The Royal Scottish Society of Arts.
|
Roznowski, T. (1989). Moving heat sources in thermoelasticity. Chichester, Ellis Horwood.
|
Rubber (1941). Rubber in Engineering. Manchester, Emmott & Co.
|
Rubino, M. (1967). Meccanica applicata alle macchine. Palermo, S. F. Flaccovio.
|
Rudd, T. (1984). Heavy metal complexation by extracellular polymers of activated sludge bacteria: 181 leaves.
|
Rudenko, N. i. F. e. (1965). Raschet i konstruirovanie tochnykh mekhanizmov.
|
Rudenko, N. i. F. e. (1969). Proektirovanie mekhanizmov i priborov.
|
Rueter, F. (1967). Data reduction program for free piston engine tests. [Ottawa, National Research Council of Canada.
|
