Salah, M. J. Y. (1989). Optimum plastic design of structures by generalized inverse theory and quadratic programming.
|
Salam, J. M. (1993). Application of a cyclic uniaxial compression testing to investigate the effects of pre-load and other factors on the structural properties of concrete affected by alkali silica reaction.
|
Salama, A. I. (1993). Repair of earthquake-damaged reinforced concrete structures.
|
Salehzadeh Nobari, A. (1992). Identification of the dynamic characteristics of structural joints.
|
Salisbury, J. K., C. Carmichael, et al. (1950). Kent's Mechanical Engineers' Handbook. Twelfth edition. New York; Chapman & Hall: London, John Wiley & Sons.
|
Salmon, D. (1998). Engineering level 2. Harlow, Longman.
|
Salmon, D. (1998). NVQ engineering level 2: mechanical units. Harlow, Longman.
|
Salmon, D. and P. Powdrill (2002). Mechanical engineering level 2 NVQ. Oxford, Newnes.
|
Salter Richard, J. (1966). Civil engineering. [With illustrations.]. London, Frederick Muller.
|
Salter, R. J. (1966). Civil engineering. London, Frederick Muller.
|
Saltiel, C., American Society of Mechanical Engineers. Fuels and Combustion Technologies Division., et al. (2003). Energy conversion and resources--2003: presented at the 2003 ASME International Mechanical Engineering Congress: November 15-21, 2003, Washington, D.C. New York, N.Y., American Society of Mechanical Engineers.
|
Samadzadeh Tabrizi, B. (1991). Three-dimensional diesel spray predictions in combustion chamber flows.
|
Samani, N. (1982). On the development and calibration of a parametric catchment sediment model: 319 leaves.
|
Samanta, S. K. (1968). The application of the upper bound theorem to the prediction of indenting and compressing loads for circular and rectangular discs. Stockholm, Royal Swedish Academy of Engineering Sciences.
|
Samanta, S. K. (1968). Theoretical analysis of the design of mechanical hammers for high-velocity hot forging. Stockholm, Royal Swedish Academy of Engineering Sciences.
|
Samanta, S. K. (1970). Dynamic deformation of aluminium and copper as a thermally activated process. Stockholm, exp. (Ingeniörsvetenskapsakademien).
|
Sames, C. M. (1911). A pocket-book of mechanical engineering; tables, data, formulas, theory and examples for engineers and students. Jersey City, N.J., C.M. Sames.
|
Sammataro Robert, F., J. Ammerman Douglas, et al., Eds. (1996). Development, validation, and application of inelastic methods for structural analysis and design, ASME.
|
Sammataro, R. F., D. J. Ammerman, et al. (1996). Development, validation, and application of inelastic methods for structural analysis and design: presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia. New York, N.Y., American Society of Mechanical Engineers.
|
Sammenslutningen af arbejdsgivere indenfor jern- og metalindustrien i Danmark. (1974). Experiments in industrial co-operation: summary. [København], The Federation.
|
Sammur, M. F. R. (1989). Finite element methods applied to elasto-plastic fracture mechanics.
|
Samokhvalov, I. A. A. (1968). Spravochnik tekhnika-konstruktora.
|
Samra, B. S. (1994). Prediction and control of the motions of marine structures.
|
Samson, C., M. Le Borgne, et al. (1991). Robot control: the task function approach. Oxford; Oxford; New York, Clarendon Press: Oxford University Press.
|
Samuel, A. and M. University of Melbourne School of Mechanical and Manufacturing Engineering Graduate School of (1989). InWEDaMM-88: 1st Workshop on engineering design and manufacturing management: Papers. Amsterdam; New York, Elsevier.
|
Sancaktar, E. and A. D. E. Division, Eds. (1995). Reliability, stress analysis, and failure prevention issues in emerging technologies and materials: Session: International mechanical engineering congress: Papers, ASME.
|
Sancaktar, E. and A. D. E. Division, Eds. (2000). Reliability, stress analysis, and failure prevention issues, ASME.
|
Sancaktar, E. and American Society of Mechanical Engineers. Design Engineering Division. (1995). Reliability, stress analysis, and failure prevention issues in emerging technologies and materials: presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, American Society of Mechanical Engineers.
|
Sancaktar, E. and American Society of Mechanical Engineers. Design Engineering Division. (1997). Reliability, stress analysis, and failure prevention issues in adhesively bonded and bolted joints, composites design: presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas. New York, N.Y., American Society of Mechanical Engineers.
|
Sancaktar, E. and American Society of Mechanical Engineers. Design Engineering Division. (1998). Reliability, stress analysis, and failure prevention aspects of adhesive and bolted joints, rubber components, composite springs: presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California. New York, N.Y., American Society of Mechanical Engineers.
|
Sancaktar, E. and American Society of Mechanical Engineers. Design Engineering Division. (1999). Reliability, stress analysis, and failure prevention issues in adhesive and bolted connections: presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee. New York, N.Y., American Society of Mechanical Engineers.
|
Sancaktar, E. and American Society of Mechanical Engineers. Design Engineering Division. (2000). Reliability, stress analysis, and failure prevention issues: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y., American Society of Mechanical Engineers.
|
Sancaktar, E. and American Society of Mechanical Engineers. Design Engineering Division. (2001). Threaded and riveted connections, design issues, reliability, stress analysis, and failure prevention: presented at the 2001 ASME International Mechanical Engineering Congress and Exposition: November 11-16, 2001, New York, New York. New York, N.Y., American Society of Mechanical Engineers.
|
Sancaktar, E. and Asme, Eds. (1999). Reliability, stress analysis, and failure prevention issues in adhesive and bolted connections, ASME.
|
Sancaktar, E. and S. A. a. F. P. C. Asme Design Engineering Division Reliability, Eds. (1998). Reliability, stress analysis, and failure prevention aspects of adhesive and bolted joints, rubber components, composite springs, ASME.
|
Sancaktar, E., J. S. Lee, et al. (1994). Reliability, stress analysis, and failure prevention aspects of composite and active materials: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Sancaktar, E., S. Jahanian, et al., Eds. (1996). Reliability, stress analysis, and failure prevention issues in fastening and joining, composite and smart structures, numerical and FEA methods, and risk minimization: presented at the 1996 ASME international mechanical engineering congress and exposition, November 17-22, 1996, Atlanta, Georgia, ASME.
|
Sanchez, J. and M. P. Canton (2002). Java programming for engineers. Boca Raton, Fla., CRC Press.
|
Sandor, G. N. and A. G. Erdman (1984). Advanced mechanism design: analysis and synthesis. Englewood Cliffs; London, Prentice-Hall.
|
Sankar Bhavani, V. and A. A. D. S. a. M. Committee, Eds. (1998). Recent advances in mechanics of aerospace structures and materials: 1998, ASME.
|
