Shawki, G. S. A. (1981). Current advances in mechanical design and production. Oxford; New York, Pergamon Press.
|
Shawki, G. S. A. and S. M. Metwalli (1981). Current advances in mechanical design and production: proceedings of the 1st International Conference, Cairo University, Egypt, 27-29 December 1979. Oxford, Pergamon.
|
Sheahan, D. F., R. A. Johnson, et al. (1977). Modern crystal & mechanical filters. New York, IEEE Press.
|
Sheikh Bahai, A. (1989). Grouting with special emphasis on silicate grouts.
|
Shelton, W. V. (1875). The mechanic's guide: a practical hand-book for the use of engineers, mechanics, artizans, &c., comprising arithmetic, geometry, mensuration, velocities, wheel-gearing, screw-cutting, the steam-engine, &c., and the general principles of mechanism; with a number of useful recipes and copius tables for practical use. London, C. Griffin and Company.
|
Shen, B. (1994). The application of second-moment turbulence closures to 2D pulverised-coal flames.
|
Shenton, A. T. (1985). Proposal for the development of research and teaching in C.A.E. within the department of mechanical engineering, Final Year Projects, Department of Mechanical Engineering, University of Liverpool.
|
Shepheard, P. (2003). Artificial love: a story of machines and architecture. Cambridge, Mass.; London, MIT Press.
|
Sheridan, A. J. (1990). Response of concrete to high explosive detonation.
|
Sherif, S. A., A. H. T. Division, et al., Eds. (1995). Heat, mass and momentum transfer in environmental flows: Session: International mechanical engineering congress: Papers. ASME -publication- FED; vol 233, ASME.
|
Sherman, F. S. (1990). Viscous flow. New York; London, McGraw-Hill.
|
Sherratt, D. J. (1986). Regional soil moisture modelling: 545 leaves.
|
Sherwood James, A., M. Sheh, et al., Eds. (1995). Numerical implementation and application of constitutive models in the finite element methods: Session: International mechanical engineering congress: Papers. ASME -publications- MD; vol 63, ASME.
|
Sherwood, J. A., M. Sheh, et al. (1995). Numerical implementation and application of constitutive models in the finite element method: presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, N.Y., American Society of Mechanical Engineers.
|
Shetty, N. (1992). System reliability of fixed offshore structures under fatigue deterioration.
|
Shibuya, S. (1986). Undrained behaviour of granular materials under principal stress rotation: 334 leaves.
|
Shields, C. J. (1942). Shields universal machinists' and auto handbook; a practical handbook for machinists, students, engineers, tool makers, draftsmen, pattern makers, aviation mechanics, auto mechanics. St. Louis, Mo., Shields publishing company.
|
Shields, C. J. (1943). Universal machinists handbook. a practical handbook for today's machinists, engineers, draftsmen, aviation mechanics, students, tool makers, pattern makers, auto mechanics, and all others in mechanical, technical and allied fields. Chicago, Ill., Wilcox & Follett co.
|
Shigley Joseph, E. (1961). Dynamic Analysis of Machines. [Another issue of pt. 2 of "Theory of Machines."]. New York, McGraw-Hill Book Co.
|
Shigley Joseph, E. (1961). Theory of Machines, etc. New York, McGraw Hill Book Co.
|
Shigley Joseph, E. (1963). [Machine Design.] Mechanical Engineering Design. (A revised and enlarged version of "Machine Design".). New York, McGraw-Hill Book Co.
|
Shigley Joseph, E. (1969). Kinematic analysis of mechanisms. 2nd ed. New York, McGraw-Hill.
|
Shigley Joseph, E. (1980). Theory of machines and mechanics. NY, McGraw-Hill.
|
Shigley, J. E. (1956). Machine design. New York, McGraw-Hill.
|
Shigley, J. E. (1961). Dynamic analysis of machines. New York; London, london: McGraw-Hill.
|
Shigley, J. E. (1961). Theory of machines. New York; London, McGraw Hill.
|
Shigley, J. E. (1967). Simulation of mechanical systems: an introduction. New York; London, McGraw-Hill.
|
Shigley, J. E. (1969). Kinematic analysis of mechanisms. New York; London, McGraw-Hill.
|
Shigley, J. E. (1985). Mechanical engineering design: metric eedition. New York, McGraw-Hill.
|
Shigley, J. E. (1986). Mechanical engineering design: metric edition. New York; London, McGraw-Hill.
|
Shigley, J. E. and J. J. Uicker (1980). Theory of machines and mechanisms. New York; London, McGraw-Hill.
|
Shigley, J. E. and L. D. Mitchell (1983). Mechanical engineering design. Auckland; London, McGraw-Hill.
|
Shigley, J. E., C. R. Mischke, et al. (2004). Mechanical engineering design: Joseph Shigley, Charles Mischke and Richard Budynas. New York; London, McGraw-Hill Higher Education.
|
Shih, R. W. K. (1989). Wave induced uplift pressures acting on a horizontal platform.
|
Shinners, S. M. (1972). Modern control system theory and application. Reading (Mass.); London, Addison-Wesley.
|
Shinskey, F. G. (1981). Controlling multivariable processes. Research Triangle Park (N.C.), Instrument Society of America.
|
Shirandami, R. (1991). Finite element investigation of short fibre reinforced thermoplastic hip prostheses.
|
Shives, T. R., L. J. Mertaugh, et al. (1988). Detection, diagnosis and prognosis of rotating machinery to improve reliability, maintainability, and readiness through the application of new and innovative techniques: prodeedings of the 41st Meeting of the Mechanical Failures Prevention Group, Naval Air Test Center, Patuxent River, Maryland, October 28-30, 1986. Cambridge, Cambridge University Press.
|
Shoarian-Sattari, K. (1985). Use of vehicle flow parameters as predictors of road traffic accident risk: 406 leaves, [5] leaves of plates.
|
Shone, V. (2001). Tools and wheels. London, Orchard Books.
|
