Sirkis, J. S., G. Washington, et al. (1998). Adaptive structures and material systems, 1998: presented at the 1998 ASME International Mechanical Engineering Congress and Exposition: November 15-20, 1998, Anaheim, California. New York, American Society of Mechanical Engineers.
|
Sirkis, J., G. Washington, et al., Eds. (1998). Adaptive structures and material systems: 1998. ASME -publications- AD; vol 57, ASME.
|
Siu Yam, W. (1996). Particle tracking in separated flows.
|
Siu, K.-C. (1982). Creep analysis for prestressed concrete structures subjected to cyclic loading and temperature: 326 leaves.
|
Sivapathasundaram, K. V. (1991). The covariant control system and its applications in remote and robotic manipulations.
|
Sixsmith, T. and R. Hanselka (1997). Handbook of thermoplastic piping system design. New York, Marcel Dekker.
|
Skaistis, S. (1988). Noise control of hydraulic machinery. New York, M. Dekker.
|
Skalak, S. C. (2002). Implementing concurrent engineering in small companies. New York, Marcel Dekker.
|
Skempas, M. (1995). Dam abutment stability: with particular reference to the Thisauros Dam.
|
Skingle, G. W. (1989). Structural modification using experimental data.
|
Skocypec, R. and American Society of Mechanical Engineers. Heat Transfer Division. (2003). Proceedings of the ASME Heat Transfer Division--2003: presented at the 2003 ASME International Mechanical Engineering Congress: November 15-21, 2003, Washington, D.C. New York, N.Y., American Society of Mechanical Engineers.
|
Skorov, G. E. (1985). SShA: problemy ekonomiki i organizatsii mashinostroeniia. Moskva, Nauka.
|
Skouloudis, A. (1984). Analysis of two-phase flow based on a velocity profile model: 250 leaves.
|
Skowronski Janislaw, M., R. S. Guttalu, et al. (1992). Mechanics and control: 4th Workshop on control mechanics: Papers. Berlin; New York, Springer-Verlag.
|
Skrotzki, B. G. A. and W. A. Vopat (1960). Power station engineering and economy: [by] Bernhardt G. A. Skrotzki [and] William A. Vopat. New York, McGraw-Hill.
|
Slack, D. and J. Little (1982). SCIENCE horizons. Level 2a: Wheels. G.B., Globe for West Sussex C.C.
|
Slater, G., I. Welding, et al. (1988). Offshore pipeline girth welds: MIG database. London, H.M.S.O.
|
Slater, G., T. G. Davey, et al. (1986). The Integrity of offshore pipeline girth welds. London, H.M.S.O.
|
Slatter, R. R. (1990). The integration of humans and machines in advanced batch manufacturing systems.
|
Slaughter, F. C. (1963). Design and the education of mechanical engineers. London, Isaac Pitman & Sons.
|
Smallwood Julian, C. (1918). Mechanical laboratory methods: the testing of instruments and machines in the mechanical engineering laboratory and in practice. New York, D. Van Nostrand Co.
|
Smallwood Julian, C. and F. W. Keator (1947). Mechanical laboratory methods: the testing of instruments and machines in mechanical engineering laboratory practice. New York, Van Nostrand.
|
Smallwood, J. C. (1918). Mechanical laboratory methods; a testing of instruments and machines in the mechanical engineering laboratory and in practice. New York, D. Van Nostrand company.
|
Smart, J. (1972). A comparative study of nonlinear viscoelasticity theories.
|
Smart, J. P. (1992). On the effect of burner scale and coal quality on low NO(x) burner performance.
|
Smart, R. A. (1906). A handbook of engineering laboratory practice. New York, J. Wiley.
|
Smart, R. F. (1973). Developments in powder metallurgy. London, Mills & Boon.
|
Smart, R. F. and J. A. Catherall (1972). Plasma spraying. London, Mills and Boon.
|
Smeaton, J. (1796). Experimental enquiry concerning the natural powers of wind and water to turn mills and other machines depending on a circular motion: And An experimental examination of the quantity and proportion of mechanic power necessary to be employed in giving different degrees of velocity to heavy bodies from a state of rest. Also New fundamental experiments upon the collision of bodies. With five plates of machines. London, Printed for I. and J. Taylor.
|
Smeaton, J. and S. Royal (1972). Civil and mechanical engineering designs of John Smeaton, F.R.S. 1724-1792: now on deposit in the archives of the Royal Society. [Wakefield, Yorks], Microform Academic Publishers.
|
Smiles, R. (1888). Brief memoir of the late William Muir mechanical engineer, London and Manchester, born 17th January 1806, died 15th June 1888. [Manchester], [s.n.].
|
Smith George, S. (1923). Mechanical Features. Section B: Mechanical Design of Spans with Supports at Unequal Elevation.
|
Smith Robert, H. (1889). Graphics of the art of calculation by drawing lines applied especially to Mechanical Engineering. [S.l.], Longmans.
|
Smith Robert, H. (1889). Graphics, or the art of calculation by drawing lines applied especially to Mechanical Engineering, etc. London, Longmans & Co.
|
Smith Sydney, H. (1951). Mechanical Methods of Calculation, London.
|
Smith, C. B. (1966). Applied mechanics for engineers. Oxford; New York [etc.], Pergamon.
|
Smith, D. J. (1983). Creep crack growth in low alloy steels under steady and cyclic loading: 480 leaves, 8 leaves of plates.
|
Smith, D. M. (1990). Fluid dynamic calculations using the multigrid approach.
|
Smith, D. R. L. (1966). Examples in mechanical science for technicians MT 3/4, Blackie.
|
Smith, D. W. (1990). Nonlinear axisymmetric elastic analysis of deep imperfect spherical shells.
|
