Smith, E. A. (1970). Mechanical drives. West Wickham, Morgan-Grampian(Kent).
|
Smith, E. H. (1994). Mechanical engineer's reference book. Oxford, Butterworth-Heinemann.
|
Smith, G. S. (1924). Transmission line design, pt. I. Mechanical features. Section B: Mechanical design of spans with supports at unequal elevation, Seattle.
|
Smith, G. T. (1989). Advanced machines: the handbook of cutting technology. Bedford, IFS.
|
Smith, J. D. (1983). Gears and their vibration: a basic approach to understanding gear noise. New York; London, M. Dekker: Macmillan Press.
|
Smith, J. D. (1987). The planning and appraisal of rural road projects: with reference to journeys to school in Peninsular Malaysia: 184 leaves.
|
Smith, J. D. (1989). Vibration measurement and analysis. London, Butterworths.
|
Smith, J. D. (1999). Gear noise and vibration. New York, Marcel Dekker.
|
Smith, K. (1981). Mechanical and engineering principles. London, Pitman.
|
Smith, K. (1982). Mechanical and engineering principles, vol 2: Fluid mechanics, thermodynamics, and instrumentation. London, Pitman.
|
Smith, L. A. (1990). Prediction of air mass flow rate in turbocharged four-stroke diesel engines.
|
Smith, L. R. (1943). Applied mechanics and heat. New York; London, McGraw-Hill Book Company, inc.
|
Smith, M. J. (1987). Photogrammetric techniques for archaeological mapping using oblique non-metric photography: 242 leaves, [3] leaves of plates.
|
Smith, P. R. (1992). The properties of high compressibility clays: with special reference to construction on soft ground.
|
Smith, R. E. (1942). Definitions and formulae for students. London [etc.], Sir. I. Pitman & sons, ltd.
|
Smith, R. H. (1889). Graphics, or the art of calculation by drawing lines, applied especially to mechanical engineering: Atlas of diagrams. London, Longmans.
|
Smith, R. H. (1889). Graphics: or, The art of calculation by drawing lines, applied especially to mechanical engineering, with an atlas of diagrams. Part I. London and; New York, Longmans, Green, and co.
|
Smith, R. H. (1889). Graphics: or, The art of calculation by drawing lines, applied especially to mechanical engineering. London, Longmans, Green, and Co.
|
Smith, R. R. (1973). Characteristics of turbulence in free flow past a vertical plate.
|
Smith, S. E. (2000). Turbulent duct flow of non-Newtonian liquids. Liverpool, Thesis Ph.D.
|
Smith, W. and Artizan club London. [from old catalog] (1844). The Artizan: a monthly record of the progress of civil and mechanical engineering, shipbuilding, steam navigation, the application of chemistry to the industrial arts, &c. London, Simpkin, Marshall.
|
Smith, W. E., J. H. Noble, et al. (1990). The Progress of civil and mechanical engineering and shipbuilding: (illustrated), being a series of selected examples of construction in marine, locomotive, and stationary engines, iron ships, and other vessels, machine tools, ordnance, and other mechanical subjects. London, Longmans, Green & Co.
|
Smyth, A. (2005). Advanced techniques for forging sequence design. Dublin, Trinity College.
|
Snape, G. (1990). Structures and machines. Harlow, Longman.
|
Snell John, B. (1973). [Mechanical engineering: railways.] Railways: mechanical engineering. London, Arrow Books.
|
Snell, J. B. (1971). Mechanical engineering: railways. Harlow, Longman.
|
Snell, J. B. (1973). Railways, mechanical engineering. London, Arrow Books.
|
Snowdon, J. C. (1968). Vibration and shock in damped mechanical systems. New York, J. Wiley.
|
Snowdon, J. C., E. E. Ungar, et al. (1973). Isolation of mechanical vibration, impact and noise: a colloquiumpresented at the ASME Design Engineering Technical Conference, Cincinnati, Ohio, September 1973. New York, American Society of Mechanical Engineers.
|
Snowdon, J. C., E. E. Ungar, et al. (1973). Isolation of mechanical vibration, impact, and noise: a colloquium presented as the ASME Design Engineering Technical Conference, Cincinnati, Ohio, September 1973. New York, American Society of Mechanical Engineers.
|
Snyder, W. E. (1985). Industrial robots: computer interfacing and control. Englewood Cliffs; London, Prentice-Hall.
|
Snyman, G. C. and M. Van Rooyen (1969). A reading list on the applications of isotopes in industry (mechanical engineering). Pretoria, Atomic Energy Board.
|
Sobey, R. J. (1973). Flow patterns in lakes and reservoirs: a theoretical and experimental study of several aspects of jet-forced reservoir circulations.
|
Soboyejo, W. O. (2003). Mechanical properties of engineered materials. New York, Marcel Dekker.
|
Soboyejo, W. O. and American Society of Mechanical Engineers. Materials Division. (2000). Proceedings of the ASME Materials Division, 2000: book of abstracts: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y., American Society of Mechanical Engineers.
|
Soboyejo, W. O. and D. American Society of Mechanical Engineers Materials, Eds. (2000). Proceedings of the ASME Materials Division: 2000, ASME.
|
Società finanziaria meccanica. and Istituto per la ricostruzione industriale (Italy) (1953). Civiltà delle macchine. Roma, Gruppo industriale della Società finanziaria meccanica "FINMECCANICA".
|
Société de publications mécaniques Paris. [from old catalog] (1942). Recueil d'épreuves théoriques et pratiques proposées au certificat d'aptitude professionnelle. Paris.
|
Society of Automotive Engineers, A. C. (1986). Advanced actuation, controls and integration for aerospace vehicles. Warrendale, Pa., Society of AutomotiveEngineers.
|
Society of Automotive Engineers, I. and E. Society of Automotive Engineers. International Congress and (1993). Electronic engine controls: 1993. Warrendale, Pa., SAE.
|
