Strehlow, R. A. (1968). Fundamentals of combustion. Scranton, Penn., International Textbook Co.
|
Stretch, L. (1986). Engineering: mechanical or moral science?. Oxford, Becket Publications.
|
Stricklin James, A., K. Saczalski, et al. (1976). Constitutive equations in viscoplasticity: computational and engineering aspects; presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, New York City, NY, December 5 - December 10, 1976; sponsored by the Applied Mechanics Division [and] the Materials Division. New York, ASME.
|
Stricklin, J. A., K. J. Saczalski, et al. (1976). Constitutive equations in viscoplasticity: computational and engineering aspects; presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, New York City, December 5-December 10, 1976. New York, American Society of Mechanical Engineers.
|
Ströer, H. J. (1957). Mehr Technik--mehr Ingenieure; der Mangel an Maschinenbau-Ingenieuren; Ursache, Umfang, Abhilfe. Frankfurt/M., Maschinenbau-Verlag.
|
Stronach, S. M. (1987). Anaerobic treatment of industrial wastewaters in high-rate bioreactors: 245 leaves.
|
Stroscio, M. A. and M. Dutta (2004). Biological nanostructures and applications of nanostructures in biology: electrical, mechanical, and optical properties. New York; London, Kluwer Academic/Plenum.
|
Structural Dynamics Research, C. (1988). Structural design against vibration: theory and experiment: course notes. Southampton, ISVR.
|
Stuart, R. J. (1984). Three-dimensional characteristics of coherent flow structures in a turbulent boundary layer over a rough surface: 467 leaves, 9 leaves of plates.
|
Stubbings George, W. (1947). Engineering Statistics, etc. Manchester, Emmott & Co.
|
Stubbings, G. W. (1947). Engineering statistics. Manchester, Emmott & Co.
|
Sturmath, R. (1993). Analysis of closed circular ring components: a range of cases taken from mechanical and structural engineering, Mechanical Engineering Publications.
|
Sturmath, R. and A. S. Tooth (1993). The analysis of closed circular ring components: a range of cases taken from mechanical and structural engineering. London, Mechanical Engineering Publications.
|
Subbarao, H. (1995). The behaviour and design of plate panels subjected to local compressive edge forces.
|
Sublet, J.-C. (1990). Activation considerations relevant to the decommissioning of fusion reactors.
|
Subramanian, K., J. Dong, et al. (1996). Manufacturing science and engineering, 1996: presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia. New York, American Society of Mechanical Engineers.
|
Sud, Y. C. and J. W. Railly (1969). Complex series. Transformation to obtain an orthogonal curvilinear grid in the meridional plane of a turbomachine. Birmingham, Department of Mechanical Engineering, University of Birmingham.
|
Sud, Y. C. and J. W. Railly (1970). A method for boundary layer or loss correction in an S2 solution of a turbomachine. Birmingham, Department of Mechanical Engineering, University of Birmingham.
|
Sud, Y. C. and J. W. Railly (1970). General solution of the flow on an S2 surface of a turbomachine using an orthogonal curvilinear grid. Birmingham, Department of Mechanical Engineering, University of Birmingham.
|
Suen, K. O. (1992). Investigation of gas flow in a motored high speed diesel engine by laser-Doppler anemometry.
|
Suh, N. P. (2001). Axiomatic design: advances and applications. New York; Oxford, Oxford University Press.
|
Suh, N. P. (2005). Complexity: theory and applications. New York, NY; Oxford, Oxford University Press.
|
Suh, T. J. (1995). The practical implementation of the hopfield neural network to combinatorial optimisation problem solutions.
|
Suhir, E. and A. E. a. E. P. Division, Eds. (1994). Structural analysis in microelectronics and fiber optics 1994: Symposium: International mechanical engineering congress: Selected papers, ASME.
|
Suhir, E. and A. E. a. E. P. Division, Eds. (1996). Structural analysis in microelectronics and fiber optics: 1996: presented at the 1996 ASME international mechanical engineering congress and exposition, November 17-22, 1996, Atlanta, Georgia, ASME.
|
Suhir, E. and A. E. a. E. P. Division, Eds. (1997). Structural analysis in microelectronics and fiber optics: 1997, ASME.
|
Suhir, E. and American Society of Mechanical Engineers. Electrical and Electronic Packaging Division. (1994). Structural analysis in microelectronics and fiber optics, 1994: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, American Society of Mechanical Engineers.
|
Suhir, E. and American Society of Mechanical Engineers. Electrical and Electronic Packaging Division. (1995). Structural analysis in microelectronic and fiber optic systems: presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, American Society of Mechanical Engineers.
|
Suhir, E. and American Society of Mechanical Engineers. Electrical and Electronic Packaging Division. (1997). Structural analysis in microelectronics and fiber optics, 1997: presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas. New York, American Society of Mechanical Engineers.
|
Suhir, E. and D. American Society of Mechanical Engineers Electrical and Electronic Packaging, Eds. (1995). Structural analysis in microelectronic and fiber optic systems: Symposium: International mechanical engineering congress: Papers, ASME.
|
Suhling, J. C., A. E. a. E. P. Division, et al., Eds. (1995). Applications of experimental mechanics to electronic packaging. ASME -publications- EEP; vol 13, ASME.
|
Suhling, J. C., American Society of Mechanical Engineers. Electrical and Electronic Packaging Division., et al. (1995). Applications of experimental mechanics to electronic packaging: presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, American Society of Mechanical Engineers.
|
Suhling, J. C., K. M. Liechti, et al. (1997). Applications of experimental mechanics to electronic packaging--1997--: presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas. New York, American Society of Mechanical Engineers.
|
Sukharev, V. A. (1982). Raschet tel namotki. Moskva, "Mashinostroenie".
|
Sullivan Roy, M., A. A. M. Division, et al., Eds. (1999). Application of porous media methods for engineered materials, ASME.
|
Sullivan, J. W., M. J. Crocker, et al. (1979). Noise-Con 79: machinery noise control: proceedings [of the] 1979 [i.e. 3rd] National Conference on Noise Control Engineering [held at the Ray W. Herrick Laboratories; School of Mechanical Engineering, Purdue University West Lafayette, Indiana, 30 April-2 May 1979]. New York, Noise Control Foundation.
|
Sullivan, N. J. (1970). Analysis of deterministic and random data. Melbourne, Dept. of Supply, Australian Defence Scientific Service, Aeronautical Research Laboratories.
|
Sullivan, R. M., American Society of Mechanical Engineers. Applied Mechanics Division., et al. (1999). Application of porous media methods for engineered materials: presented at the 1999 ASME International mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee. New York, American Society of Mechanical Engineers.
|
Sulzer Brothers. Pump, D. (1989). Sulzer centrifugal pump handbook. London, Elsevier Applied Science.
|
Summers-Smith, J. D. (1969). An introduction to tribology in industry. Brighton, Machinery Publishing.
|
