Timings, R. L. and O. Alabi (1983). Mechanical engineering craft theory and related subjects. London, Longman.
|
Timings, R. L. and W. G. Watson (1973). Basic electrical and electronic engineering. London, Longman.
|
Tinker, D. B., M. J. Dwyer, et al. (1992). Causes of damage to power take-off shaft guards. Alternative power supply tractor to implement. London, HMSO.
|
Tinker, S. J. (1988). System identification of submersible manoeuvring dynamics.
|
Tinnell, R. W. (1971). Mechanisms/drives. Albany, N.Y., Delmar Publishers.
|
Tipadis, G. (1991). Mathematical models for wastewater treatment by the rotating biological contactor process.
|
Tir, K. V. (1965). Mekhanika poligraficheskikh avtomatov.
|
Tither, D., U. Manchester Metropolitan, et al. (1996). The 2/stroke thematic network circular: selected presentations from the Second International Workshop and Thematic Network Meeting on Modernised 2/Stroke Engines. Manchester, Manchester Metropolitan University.
|
Titherington, D. and J. G. Rimmer (1969). Mechanical engineering science. London; New York, McGraw-Hill.
|
To, W. M. (1991). Sensitivity analysis of mechanical structures using experimental data.
|
Tochtermann, W. and F. Bodenstein (1968). Konstruktionselemente des Maschinenbaues; Entwerfen, Gestalten, Berechnen, Anwendungen. Berlin, New York, Springer-Verlag.
|
Todd, J. P. and H. B. Ellis (1981). An introduction to thermodynamics for engineering technologists. New York; Chichester, Wiley.
|
Toh Peng, S. (1990). Three-dimensional reconstruction by active integration of visual cues.
|
Tolhausen, A. (1883). Engineering review: the weekly edition of Mechanical engineering, forming a compendium of home and foreign engineering journals, London.
|
Toll, D. G. (1988). The behaviour of unsaturated compacted naturally occurring gravel.
|
Tomalin, M. (1954). Growth of mechanical power. London, Methuen.
|
Tombs, S. G. (1969). Strength and deformation characteristics of rockfill.
|
Tomlinson, C. (1854). Cyclopaedia of useful arts, mechanical and chemical, manufactures, mining and engineering. 2v. v1.
|
Tomlinson, C. (1854). Cyclopaedia of useful arts, mechanical and chemical, manufactures, mining and engineering. 2v. v2.
|
Tomlinson, C. (1854). Cyclopaedia of useful arts, mechanical and chemical, manufactures, mining, and engineering. London, G. Virtue.
|
Tomlinson, C. (1866). Cyclopedia of Useful Arts, Mechanical and Chemical, Manufacturers, Mining and Engineering. [S.l.], Virtue & Co.
|
Tomlinson, C. and o. Great Exhibition (1854). Cyclopædia of useful arts, mechanical and chemical, manufactures, mining, and engineering. London, G. Virtue & Co.
|
Tomlinson, C. e. (1997). Cyclopædia of useful arts, mechanical and chemical, manufactures, mining, and engineering: Edited by Charles Tomlinson. The whole illustrated by forty steel engravings, and two thousand four hundred and seventy-seven wood engravings. The Nineteenth Century. General Collection; title no. N.1.1.10158. Cambridge, Chadwyck-Healey Ltd.
|
Tomlinson, C. F. R. S. F. C. S. (1852). Cyclopædia of Useful Arts, mechanical and chemical, manufactures, mining and engineering. Illustrated by forty steel engravings, etc. [Edited by C. Tomlinson.], London & New York.
|
Tomlinson, G. (1984). Industrial workshop practice. London, Pitman.
|
Tompkins, A. E., J. D. Potter, et al. (1898). A text book of marine engineering: with supplement, Belleville boiler, &c, &c: for the use of naval officers, marine engineers, and students of marine and mechanical engineering.: With 142 illustrations. Portsmouth, J. Griffin & Co.;London: Simpkin Marshall & Co;Minories: Norie & Wilson.:H. Hughes & Son.:J.D.Potter.;Liverpool: Philip, Son & Nephew; Shanghai:Kelly and Walsh; Hong Kong: Kelly and Walsh; Yokohama: Kelly and Walsh; Glasgow: Brown & Son.; Berlin: W. H. Kuhl; St. Petersburg: C. Ricker; Tokio: Maruya & Co.
|
Tondl, A. (1991). Quenching of self-excited vibrations. Amsterdam; New York, Elsevier.
|
Tong Timothy, W. and E. Arizona State University Department of Mechanical and Aerospace, Eds. (1994). Thermal conductivity 22: 22nd International conference: Papers, Technomic Publishing.
|
Tong, C. and D. Sriram (1992). Artificial intelligence in engineering design. Boston, Mass.; London, Academic Press.
|
Tong, L. S. and Y. S. Tang (1997). Boiling heat transfer and two-phase flow. Washington, D.C.; London, Taylor & Francis.
|
Tonga Taehakkyo. Haksaeng Kigye Hakhoe. (1960). Tonga kigye hakpo. [Pusan], Tonga Taehakkyo Kongkwa Taehak, Haksaeng Kigye Hakhoe: v.
|
Tonyan, M. J. and T. Goldoftas (1985). Electronically controlled proportional valves: selection and application. New York, M. Dekker.
|
Too James, J. M., R.-M. Guo, et al., Eds. (1995). Recent advances in heat transfer and micro-structure modelling for metal processing: Symposium: International mechanical engineering congress: Papers, ASME.
|
Topp, D. A. (1992). Fatigue/fracture mechanics analysis of threaded tether connections.
|
Torby, B. J. (1984). Advanced dynamics for engineers. New York; London, Holt, Rinehart and Winston.
|
Torrella Sagrera, A. and J. Sans y Oliveras (1940). Mecánica general. Barcelona, Bosch.
|
Torrens, H. and L. Stothert and Pitt (1978). The evolution of a family firm: Stothert and Pitt of Bath. Bath (Bath BA2 3DJ), Stothert and Pitt Ltd.
|
Torres Guzman, J. C. (1991). Combined boundary and finite element method for elastostatics.
|
Torvik, P. J., M. American Society of Mechanical Engineers. Winter, et al. (1980). Damping applications for vibration control: [papers] presented at the winter annual meeting of the American Society of Mechanical Engineers Chicago, Illinois November 16-21, 1980. New York, ASME.
|
Tosatto, G. (1969). Lezioni di meccanica applicata alle macchine. Padova.
|
