Tothill, J. T. (1966). Ships in restricted channels. A correlation of model tests, field measurements and theory. Ottawa, National Research Council of Canada.
|
Totten, G. E. (2000). Handbok of hydraulic technology. New York; Basel, Marcel Dekker.
|
Totten, G. E. (2000). Handbook of hydraulic fluid technology. New York, Marcel Dekker.
|
Totten, G. E., L. Xie, et al. (2004). Handbook of mechanical alloy design. New York, Marcel Dekker.
|
Totten, G. E., L. Xie, et al. (2004). Modeling and simulation for material selection and mechanical design. New York, Marcel Dekker.
|
Toumazis, A. D. (1989). An investigation of the physics of breaking/broken waves.
|
Towers, O. L. (1988). Measurement of fracture toughness for the assessment of defects in structures.
|
Towill, D. R. (1970). Transfer function techniques for control engineers. London, Iliffe Books.
|
Towill, D. R. (1981). Coefficient plane models for control system analysis and design. Chichester, Research Studies.
|
Trade Relations Research, B. and A. World Trade Alliance (1946). Reports on the Reciprocal Expansion of Production in Engineering and Agriculture: Mechanical Equipment for an Immediate and Short-Term Expansion of World Food Production. London, World Trade Alliance Association.
|
Transit New Zealand Road Research, U. (1990). Bridge design and research: Seminar: Papers and summaries, Transit.
|
Transport, P. (1971). Science Research Council, Engineering Board, Aeronautical and Civil Engineering Committee [and] Mechanical and Production Engineering Committee, Transport Panel report. [London], S.R.C.
|
Trasorras Juan, R. L., M. McMeeking Robert, et al., Eds. (1995). Net shape processing of powder materials: Symposium: International mechanical engineering congress: Papers, ASME.
|
Travis, R. P. (1991). A second generation computer aided design system for prosthetics and orthotics.
|
Traynor, J. P. (2005). Weigh in motion device for heavy goods vehicles. Dublin, Trinity College.
|
Treloar, R. D. (1989). Mechanical engineering services: a plumbing encyclopaedia. Oxford, BSP Professional.
|
Treloar, R. D. (1996). Plumbing encyclopaedia. Oxford; Cambridge, Mass, Blackwell Science.
|
Trenouth, J. M. and M. S. Grzedzielski (1969). The examination of etched niobium and niobium alloys in polarized light. [Ottawa, National Research Council of Canada.
|
Trent, E. M. (1984). Metal cutting. London, Butterworths.
|
Trery, W. G. (1858). A Study Book of Civil and Mechanical Engineering: exemplified by numerous working drawings on a large scale: comprising a series of important executed works. by eminent British and Foreign Engineers, London.
|
Trewman Harry, F. (1946). Mechanical Inspection. A survey. with special reference to precision engineering. London, Sir Isaac Pitman & Sons.
|
Trewman Harry, F. (1965). Mechanical Engineering as a Career. [With plates.]. London, B. T. Batsford.
|
Trewman, H. F. (1946). Mechanical inspection: a survey of the underlying principles and practical aspects of mechanical inspection with special reference to precision engineering. London, I. Pitman.
|
Trewman, H. F. (1965). Mechanical engineering as a career, Batsford.
|
Trietley, H. L. (1986). Transducers in mechanical and electronic design. New York, Dekker.
|
Tripartite Meeting on Lifelong Learning in the Mechanical and Electrical Engineering, I., O. International Labour, et al. (2003). Note on the proceedings: Tripartite Meeting on Lifelong Learning in the Mechanical and Electrical Engineering Industries, Geneva, 23-27 September 2002. Geneva, International Labour Office.
|
Trondheim. (1967). Verktøymaskinlaboratoriets programserie. [Trondheim.
|
Trowbridge, W. P. and YA Pamphlet Collection (Library of Congress) (1870). The profession of the mechanical or dynamical engineer. An inaugural address before the Sheffield scientific school of Yale college, delivered October 5, 1870. New Haven, Printed by Tuttle, Morehouse & Taylor.
|
Trueb, U. (1984). Stability problems of elasto-plastic plates and shells by finite elements: 289 leaves.
|
Trujillo, D. M. and H. R. Busby (1997). Practical inverse analysis in engineering. Boca Raton, FL; London, CRC Press.
|
Trushel, P. J. (1968). A fibonacci search algorithm for the approximate minimization of a function of a single variable. [Ottawa, National Research Council of Canada.
|
Trutnovsky, K. (1973). Berührungsfreie Dichtungen. Düsseldorf VDI-Verlag.
|
Trutnovsky, K. (1975). Berührungsdichtungen an ruhenden und bewegten Maschinenteilen. Berlin; New York, Springer-Verlag.
|
Tsabourakis, N. (1992). Computer-aided non contact inspection in engineering manufacture.
|
Tsai Her, M. (1988). Some experimental contributions to the study of large scale structure in turbulent boundary layers.
|
Tsai, L.-W. (2001). Mechanism design: enumeration of kinematic structures according to function. Boca Raton, Fl.; London, CRC Press.
|
Tsakonas, A. L. (1985). Skidding resistance and methods of monitoring pavements: 228 leaves, [6] leaves of plates.
|
Tsang Chau, C. (1987). Hydraulic and aeration performance of labyrinth weirs.
|
Tsang, S. K. (1985). Collapse of ring stiffened cylindrical shells under combined external pressure and axial compression: 398 leaves, 7 leaves of plates.
|
Tsao, T.-C. and American Society of Mechanical Engineers. Dynamic Systems and Control Division. (2002). Proceedings of the ASME Dynamic Systems and Control Division--2002: presented at the 2002 ASME International Mechanical Engineering Congress and Exposition: November 17-22, 2002, New Orleans, Louisiana. New York, New York, American Society of Mechanical Engineers.
|
