Tsao, T.-C., A. D. S. a. C. Division, et al. (2002). Proceedings of the ASME Dynamic Systems and Control Division - 2002: presented at the 2002 ASME International Mechanical Engineering Congress and Exposition: November 17-22, 2002, New Orleans, Louisiana. New York, NY, American Society of Mechanical Engineers.
|
Tsatsami, V. (1987). Inlet manifold processes of S.I. engines under cold operating conditions: 241 leaves, [9] leaves of plates.
|
Tsatsanifos, C. (1982). Effective stress method for dynamic response analysis of horizontally layered soils: 266 leaves.
|
Tse, D. G. N. (1988). Flow and combustion characteristics of model annular and can-type combustors.
|
Tse, F. S. and I. E. Morse (1989). Measurement and instrumentation in engineering: principles and basic laboratory experiments. New York, Marcel Dekker.
|
Tse, F. S., I. E. Morse, et al. (1978). Mechanical vibrations: theory and applications. Boston [Mass.]; London [etc.], Allyn and Bacon.
|
Tsekos, C. (1996). Weather downtime statistics for marine projects.
|
Tsicnias, T. (1981). Coupled lateral and torsional earthquake response of buildings with rigid floor diaphragms: 247 leaves.
|
Tsironis, I. (1996). A fracture mechanics based approach to ultrasonic testing of fretting fatigue cracks.
|
Tsotridis, G. (1983). Velocity distribution in a gas centrifuge used as an isotope separator: 311 leaves.
|
Tsui, Y.-Y. (1987). Calculation of three-dimensional flow in motored engines.
|
Tulley, H. C. (1907). Handbook on engineering. The practical care and management of dynamos, motors, boilers, engines, pumps, inspirators and injectors, refrigerating machinery, hydraulic elevators, electric elevators, air compressors, rope transmission and all branches of steam engineering. St. Louis, Mo., Sold by H.C. Tulley & co.
|
Tullis, J. P. (1989). Hydraulics of pipelines: pumps, valves, cavitation, transients. New York (N.Y.); Chichester, Wiley.
|
Tung, M.-B. (1981). Ignition of methane-air mixtures by hot nitrogen jets: 268 leaves, 2 leaves of plates.
|
Tuplin, W. A. (1959). Modern engineering workshop practice. London, Odhams Press.
|
Turbocharging and, T., D. Institution of Mechanical Engineers. Power Industries, et al. (1982). Turbocharging and Turbochargers 1982: [held] 26-28 April 1982 Institution Headquarters.London. London, Published by Mechanical Engineering Publications Limited for the Institution of Mechanical Engineers.
|
Turck, F. B. and W. E. Hill (1944). Scientific methods of distribution, [S.l.].
|
Turgut, E. (1981). The expansion of cavities in clays and sands: 109 leaves.
|
Turner, K. L. and American Society of Mechanical Engineers. MEMS Subdivision. (2003). Micro-electro-mechanical systems (MEMS)--2003: presented at the 2003 ASME International Mechanical Engineering Congress: November 15-21, 2003, Washington, D.C. New York, N.Y., American Society of Mechanical Engineers.
|
Turner, P. J. (1982). Finite element electromagnetic analysis of turbine-generator performance: 224 leaves.
|
Turner, P. J. (1987). Tracking control of a direct-drive robot.
|
Turng, L. S. and C. American Society of Mechanical Engineers Materials Division Polymers, Eds. (2000). CAE and related innovations for polymer processing, ASME.
|
Turng, L.-S. and American Society of Mechanical Engineers. Materials Division. (2000). CAE and related innovations for polymer processing: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y., American Society of Mechanical Engineers.
|
Turns, S. R. (2000). An introduction to combustion: concepts and applications. Boston; london, WCB/McGraw-Hill.
|
Turriano, J. and J. A. García-Diego (1983). Los veintiún libros de los ingenios y de las máquinas. Madrid, Colegio de Ingenieros de Caminos Ediciones Turner.
|
Turriano, J. and N. Biblioteca (1998). The twenty-one books of engineering and machines of Juanelo Turriano. [Madrid?], Fundacion Juanelo Turriano/Doce Calles/Biblioteca Nacional.
|
Turton, R. K. (1995). Principles of turbomachinery. London; New York, Chapman & Hall.
|
Turunen, R. and L. Helsinki University of Technology Internal Combustion Engine (1993). On the combustion and heat transfer in a high speed diesel engine operating with rape seed oil methyl ester fuel. Otaniemi, Helsinki University of Technology, Internal Combustion Engine Laboratory.
|
Tuttle, M. E. (2003). Structural analysis of polymeric composite materials. New York, Marcel Dekker.
|
Tuve, G. L. (1961). Mechanical engineering experimentation. New York, McGraw-Hill.
|
Tvilum, A. and N. Andersen (1948). Maskinteknik, tabeller og formler for ingeniører og studerende i maskinteknik. København, J. Gjellerup.
|
Twinberrow James, D. (1908). [Mechanical Engineering Diagrams.]. London, "Railway Engineer".
|
Tyler, N. A. (1992). High capacity bus system: a design methodology using artificial intelligence.
|
Tyler, R. G. (1973). Creep and shrinkage of concrete bridge structures.
|
Tzamtzis, A. (1994). Dynamic finite element analysis of complex discontinuous and jointed structural systems using interface elements.
|
Tzou, D. Y. (1996). Macro- to microscale heat transfer: the lagging behavior. Washington, DC; London, Taylor & Francis.
|
Tzou, H. S., M. F. Golnaraghi, et al. (2000). Control of vibration and noise: new millennium: presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y., American Society of Mechanical Engineers.
|
Tzou, H. S., R. Kashani, et al. (1998). Vibration and noise control: presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California. New York, N.Y., American Society of Mechanical Engineers.
|
Tzou, H.-S., M. F. Golnaraghi, et al., Eds. (2000). Control of vibration and noise: new millennium, American Society of Mechanical Engineers.
|
Üçer, A. S., P. Stow, et al. (1985). Thermodynamics and fluid mechanics of turbomachinery. Dordrecht, Martinus Nijhoff.
|
