Vernon, J. B. (1967). Linear vibration and control system theory: with computer applications. New York; London, Wiley.
|
Vernon, J. B. (1967). Linear vibration theory: generalized properties and numerical methods. New York; London, Wiley.
|
Verrico, C. (1968). Esercizi di meccanica applicata alle macchine. Milano, Tamburini.
|
Verriopoulos, C. A. (1983). Effects of convex surface curvature on heat transfer in turbulent flow: 401 leaves.
|
Vervalin, C. H. (1981). Communication and the technical professional. Houston; London, Gulf Pub. Co., Book Division.
|
Veziroglu, T. N., S. Miami International Conference on Alternative Energy, et al. (1989). Alternative energy sources VIII. New York, Hemisphere.
|
Victoria and Albert Museum. (1908). Catalogue of the mechanical engineering collection in the Science division of the Victoria and Albert museum, South Kensington, Pt. [n. p.].
|
Victoria and Albert Museum. Science, D. (1908). Catalogue of the mechanical engineering collection in the Science Division of the Victoria and Albert Museum, South Kensington, with descriptive and historical notes. London, HMSO.
|
Victoria and Albert, M. (1907). Catalogue of the mechanical engineering collection in the science division of the Victoria and Albert Museum, South Kensington. London, Printed for H.M. Stationery Off. by Wyman and Sons, Limited.
|
Victoria and Albert, M. (1908). Board of Education, South Kensington: Supplement containing illustrations of catalogue of the mechanical engineering collection in the Science Division of the Victoria and Albert Museum, South Kensington. London, H.M.S.O.
|
Viersma, T. J. (1980). Analysis, synthesis and design of hydraulic servosystems and pipelines. Amsterdam; Oxford (etc.), Elsevier Scientific.
|
Vieweg, H.-G. and H. G. Hilpert (1993). Japans Herausforderung an den deutschen Maschinenbau. Berlin, Duncker & Humblot.
|
Vijayakumar, S. (1988). Optimal vehicle size for road-based urban public transport in developing countries.
|
Vilhelmsen, T. (1996). Creep failure of modified 9Cr steel weldments.
|
Villasenor Rivero, F. (1991). The Kelvin-Helmholtz Instability in a stratified shear flow.
|
Vinas Pich, J. (1994). Influence of environment, loading and steel composition on fatigue of tubular connections.
|
Virgin, L. N. (1986). Predicting the generic instabilities of dynamical systems in applied mechanics: 247 leaves.
|
Visser, W. and J. F. Besseling (1969). Large displacement analysis of beams. Delft [The Netherlands], Technological University, Dept. of Mechanical Engineering.
|
Visser, W. J. (1993). Updating structural dynamics models using frequency response data.
|
Visvalingam, A. C. (1970). Flow through partly-lined conduits.
|
Voege, E. and Artos (1970). A new concept in mechanical engineering: Artos 1945-1970. Hamburg, Artos.
|
Vogel, S. (2003). Comparative biomechanics: life's physical world. Princeton, NJ; Oxford, Princeton University Press.
|
Vogwell, J. and Seed (1991). Component selection: standard gears. [Hatfield?], SEED in association with the Design Council.
|
Vogwell, J. and Seed (1991). Component selection. [Hatfield?], SEED.
|
Vogwell, J. and Seed (1994). Component selection: chain drives. [Hatfield?], SEED in association with the Design Council.
|
Volk, M. W. (1996). Pump characteristics and applications. New York, M. Dekker.
|
Von Spakovsky, M., S. Garimella, et al., Eds. (2000). Proceedings of the ASME Advanced Energy Systems Division: 2000, ASME.
|
Von Sperling, M. (1990). Optimal management of the oxidation ditch process.
|
Vos, A. d. (1992). Endoreversible thermodynamics of solar energy conversion. Oxford; New York, Oxford University Press.
|
Voshgir, Z. (1994). Analysis of the contact pressure distribution in cylindrical roller bearings under combined radial and axial loads.
|
Voskoboinikov, B. S. (2003). Sovremennyi anglo-russkii slovar' po mashinostroeniiu i avtomatizatsii proizvodstva: okolo 15,000 terminov. Moskva, "RUSSO".
|
Voyiadjis, G. Z. and P. I. Kattan (2005). Damage mechanics. Boca Raton, Taylor & Francis.
|
Vries, D. K. d. (1991). Identification for robust control: what is the best approach. Delft, Delft University of Technology.
|
Vrzal, B. r. (1972). Strojnické tabulky. Praha, SNTL, [t. Tisk 1.
|
Waas Anthony, M., D. Whitcomb John, et al., Eds. (2001). Damage initiation and prediction in composites, sandwich structures and thermal barrier coatings, ASME.
|
Waas, A. M., J. D. Whitcomb, et al. (2001). Damage initiation and prediction in composites, sandwich structures and thermal barrier coatings: presented at the 2001 ASME International Mechanical Engineering Congress and Exposition: November 11-16, 2001, New York, New York. New York, New York, American Society of Mechanical Engineers.
|
Wadee, M. K. (1993). Elements of a Lagrangian theory of localized buckling.
|
Wagener, A. M., H. R. Arthur, et al. (1945). The machinists' and draftsmen's handbook. New York, D. Van Nostrand company, inc.
|
Wagner, W. (1983). Continental! its motors and its people. [Washington, D.C.], Armed Forces Journal International.
|
Waid, R. L., C. American Society of Mechanical Engineers. Fluids Engineering Division. Polyphase Flow, et al. (1974). Cavitation and Polyphase Flow Forum, 1974; presented at [the] Joint Meeting of Fluids Engineering Division of the American Society of Mechanical Engineers and the Canadian Society for Mechanical Engineering, May 13-15, 1974, Montreal, Quebec, Canada. New York, American Society of Mechanical Engineers.
|
